Production Engineer - P993

Production and Operations Engineer with a bachelor's degree and over 30 years of experience working for major operators, a large independent, small independents, and service companies. Experience includes conventional and unconventional assets, CO2 source fields, inland water fields, horizontal wells, deep exploratory wells, high pressure/high temperature wells, rod pump oil wells, reservoir engineering, reserve reviews, successful challenge of tax appraisals, cost estimations, feasibility reviews, drilling specifications, drilling design and supervision, operations engineering, project management, barge and land rig management, hurricane repair operations, facility inspections, P&ID revisions, safety reviews and evaluations, completion procedures, completion design and supervision, initiation of the tubeless completion technique, hydraulic fracturing, field compression installation, on-site field supervision, production analysis, plunger lift, workovers, injection reworks, acid stimulation redesign, and hydraulic fracturing redesign and modification. Geographic areas worked include Chad, the Doe Canyon field, the Eagle Ford shale, east Texas, the upper Gulf coast, the Gulf of Mexico, Louisiana, the McElmo Dome, Mississippi, Nigeria, the Olmos Sandstone, the Sacroc Unit (Snyder, Texas), the Selma chalk, and western Siberia.

Production Engineer - P1031

Innovative Production Engineer with over 20 years of Oil and Gas production and completions experience in Unconventional and Conventional reservoirs in the U.S., Canada, and Argentina. Known for strong problem solving and analytical skills with proven ability to identify and realize opportunities. Successfully led multidisciplinary projects, teams, and field operations. Mentored less experienced engineers/field personnel and provided value added services. Strong entrepreneurial spirit. Core skills include Formation Damage Diagnostics, Well Productivity and Injectivity Enhancement, Stimulation/Remedials Job Design, Asset Corrosion Management, Flow Assurance, Data Analysis, Project Management, Performance Improvement, Budget Development and Management, New Technologies Field Evaluation, Surface Facilities Operations and Maintenance, Hydraulic Fracturing Modeling & Optimization, Production Systems Simulation, and Artificial Lift Strategy and Optimization.

Production Engineer - P944

Senior Production Engineer with a master's degree in petroleum engineering, a bachelor's degree in mechanical power technology engineering, and 25 years of experience working for a major operator, a small independent, and a service company. Experience includes unconventional assets, vertical and horizontal wells, production analysis and optimization, artificial lift, gas lift, pumping unit installations, rod pump designs and procedures, progressive cavity pumps, onshore and offshore electric submersible pumps, jet pumps, acid stimulation, workovers, recompletion procedures and cost estimates, operational supervision and coordination, contract performance evaluation, capital and expense AFEs, surveillance workflow development, and training junior engineers. Geographic areas worked include the Wolfcamp shale, the Eagle Ford shale, the Elk Hills field, the Rocky Mountains, the Haynesville shale, the Bakken formation, the Orinoco belt, and Lake Maracaibo. Fluent in English and Spanish.

Production Engineer - P1029

Accomplished Offshore Engineering professional with eight years of experience exclusively within the offshore oil and gas industry. Recognized as a strong leader who not only meets but exceeds both client and company expectations. Extensive background in asset retirement projects, reservoir, production, and drilling engineering. Demonstrated successes in project planning and execution of wireline interventions, abandonments, recompletions, acidizing, gravel packing, hydraulic stimulations, fishing, and artificial lift changes. Well-versed at monitoring production operations, ensuring everyone's adherence to safety protocols, and evaluating the staff's performance, strategizing on maximizing productivity to deliver efficient results that would drive revenues and increase profitability. Vast experience in life cycle management of numerous artificial lift systems, specializing in economic evaluation, technical design, implementation, surveillance, and troubleshooting to maximize run time and production. Excels at working collaboratively across interdisciplinary groups to achieve common goals and deliver business objectives. Currently seeking an engineering role within a company that will view my skill set as beneficial and a valuable addition to their team.

Production Engineer - P663

Production Engineer with a bachelor's degree in petroleum engineering and 32 years of experience working for a service company and mid-sized operators. Experienced in completions, recompletions, production, and workover operations including horizontal completions, coiled tubing, multi-stage fracturing, acid stimulations, and gas lift diagnostics. Geographic areas worked include south Texas, Louisiana, North Dakota, and the Gulf of Mexico OCS.

Production Engineer - P759

Production Engineer with a bachelor's degree in petroleum engineering and more than 30 years of experience working in several industries including oil and gas. Experienced in supervision of field personnel, executing workovers, tracking daily production, creating and implementing AFEs, optimizing production, completions, recompletions, facility operations, well testing, cost control, and developing production plans for new wells. Geographic areas worked include Texas, Wyoming, New Mexico, and Louisiana. Software proficiency in ARIES, WellView, Dwights, FieldDIRECT, and Service Star.

Production Engineer - P588

Production Engineer with a bachelor's' degree in petroleum engineering and 34 years of experience in the oil and gas industry working for independent E&P companies. Experienced in managing land and offshore operations for drilling and production including developing procedures, designing wells, supervising personnel, creating AFEs, coordinating with regulatory agencies, forecasting, and budgeting. Also expert in creating production operations teams for acquisitions of producing properties onshore and offshore and in managing production operations in a variety of environments. Geographic areas worked include the Gulf of Mexico shelf and deepwater, Permian Basin, Eagle Ford, Venezuela, and China. Computer skills include DIMS, PERFORM, and J.D. Edwards.

Production Engineer - P792

Executive with a bachelor's degree in petroleum engineering and over 30 years of oil and gas industry experience working for mid-sized to large independent operating companies. Experienced in production operations, engineering and construction, exploitation, surveillance, recompletion, workovers, decommissioning, and acquisitions and divestments. Successfully executed major acquisitions as well as divestment projects. As a company officer and member of the Executive team, delivered EBITA targets that exceeded budgets, maintained HSER performance at “best in class” levels, delivered exploitation and exploration new drills on budget and schedule, and completed decommissioning activities in compliance with BSEE requirements at roughly 30% cost savings. Geographic areas worked include shelf, onshore, and offshore GOM, offshore West Africa, and Brazil.

Production Engineer - P774

Production Engineer with a bachelor's degree in petroleum engineering and 15 years of experience working for mid-sized operators and service companies. Experienced in the design and build of production surveillance and business intelligence tools, artificial lift optimization, production surveillance, custom mapping, production allocation and accounting, CO2 floods, field development planning, field mapping and coordination, AFE preparation, workover scheduling, pattern performance evaluation, workover operations management, and cost estimation and tracking. Geographic areas worked include Texas and Oklahoma. Software proficiency in DSS, OFM, Petra, and FieldDIRECT. Certifications include H2S, Logging Supervisor, and Well Control.

Production Engineer - P630

Production Engineer with a bachelor's degree in petroleum engineering and 11 years of experience working for a service company. Experience includes tubing optimization for CO2 injection wells, completion failure analysis (elastomers, metallurgy, connection type, packer setting method, and tubing stretch calculations), completions project management for dual injection string design , equipment procurement, scheduling, delivery, and daily workover rig prioritizing for capital and operational projects. Additional experience includes CO2 flood installation, drill completion procedures including log evaluation (GR, CNL, PNN, etc.), perforation selection, well site service organization, capital workover expenditure and daily well report review, metallurgy/corrosion inhibitors, down-hole equipment testing, flooding optimization, decline curve and production/injection data analysis, sub pump systems design (sizing, VSDs applications, gas separators, down hole equipment selection), failure analysis and optimization, cost analysis, budget forecast , and quarterly operations review preparation. Geographic locations worked include the Strawn formation and the Canyon Reef formation. Computer skills include ARIES, Petra, and DSS. H2S and WCS well control certified.

Production Engineer - P393

Petroleum Engineer with more than 30 years of extensive experience in production, operations and drilling engineering functions with major oil and gas firms. Skilled at interactive management style with hands-on engineering expertise in field optimization through implementation of drilling and completions, workovers, artificial lift, surface facility design, field studies, and aggressive cost reduction programs for high pressure, hostile, and low pressure oil and gas work environments. Geographic experience includes the Rocky Mountains, northern Louisiana, and the upper Texas Gulf coast.

Production Engineer - P685

Production Operations Engineer with a bachelor's degree in geology and 18 years of experience working for small operators and service companies. Experienced in drilling, completion, production operations, gas floods, recompletions, log analysis, researching well history and titles, cement squeeze design, stimulation design, equipment selection, hydraulic fracturing, artificial lift design, acidizing, and pipeline and facilities installation. Geographic areas worked include east Texas, Oklahoma, and Kansas. Software proficiency in PHDWin.

Production Engineer - P651

Production Operations Engineer with a bachelor's degree in engineering and 20 years of oil and gas experience working for service companies and a major operator. Experienced in optimization design, well integrity management, plunger lift optimization, well production risk and reliability monitoring, measurement and allocations, control room operation, safety training, and procedural writing. Geographic areas worked include Louisiana and Arkansas.

Production Engineer - P795

Executive with a bachelor's degree in civil engineering and 40 years of experience in production engineering and operations management for large and medium sized independents. Extensively accomplished in diverse projects in the areas of production, drilling, completions, construction, gas processing, exploration, HSE, and government relations. Experienced in managing construction and production operations onshore, offshore, and in inland waters in the U.S., Africa, and South America including fabrication and installation of new platforms and facilities through decommissioning. Recognizes value overlooked by others, and can balance high technology and common sense. Possesses extraordinary problem solving skills and is capable of managing multiple crises simultaneously using creative, innovative, and three-dimensional thought process.

Production Engineer - P496

Operations Manager with a master's degree in petroleum engineering and 30 years of oil and gas experience working for small to mid-sized independents. Experienced in drilling, completion, and production operations management; conventional and unconventional assets, planning and executing drilling programs, developing custom artificial lift and production facilities, directional drilling, multi-stage fracturing, and designing pipeline and production equipment. Geographic areas worked include Texas, Louisiana, Oklahoma, Alabama, and New Mexico.

Production Engineer - P945

Experienced Petroleum Engineer with a bachelor's degree in petroleum engineering and 15 years of experience with independents and in the service sector. Expert in managing operations and engineering in completions and production including conventional plug and perf, slick-water and gel-fluid completions with toe activation subs. Also engineered, designed and implemented completion procedures, managed company men and consultants, and created completion AFEs and tracked costs from rig release to post-flowback including TCP, frac, flowback, and tubing installs. Geographic experience includes conventional, unconventional, and coalbed assets in Oklahoma, Texas, Pennsylvania, Ohio, West Virginia, Kentucky, and Virginia. Special expertise in Spotfire.

Production Engineer - P990

Field Engineer with an MBA, a bachelor's degree in computer information systems, and 12 years of experience working for service companies. Experience includes horizontal tractor operations, perforating, plug setting, logging, production logging, fishing, manipulation of sliding sleeves, onshore and offshore coil tubing, wireline logging through CT, N2 lifts, milling plugs, sand cleanouts, plug-and-perforations, evaluation of electronic PCB assemblies, component validation, crew management, parts and equipment inventory, and work reports. Geographic areas worked include Arkansas, Colorado, Louisiana, New Mexico, North Dakota, Oklahoma, Pennsylvania, Texas, West Virginia, Angola, Equatorial Guinea, and Norway. Computer skills include Cerebus 11.5, tractor monitoring software, financial planning software, computer programming, Labview, and Viewstation.

Production Engineer - P856

Production Engineer with a bachelor's degree in petroleum and natural gas engineering and eight years of experience working for a small independent and a service company. Experience includes forecasting, reserves estimation, EOR, production analysis, field monitoring and surveillance, real-time drilling monitoring and analysis, digital oilfield well performance monitoring and diagnostics, workflow development, reservoir optimization, and waterflooding diagnostics. Additional experience includes technical marketing for production engineering solutions, business development, market positioning, training, and international publications and presentations. Computer skills include Avocet, OFM, Peep, Petrel, and PIPESIM. Languages include fluent Spanish and Portuguese.

Production Engineer - P980

Production Engineer with a bachelor's degree in petroleum engineering and two years of experience working for service companies. Experience includes hydraulic fracturing operations, proppant and acid delivery, fluid systems quality control, rig up/rig down, pump maintenance, equipment mobilization, database maintenance, and technical support. Computer skills include FracPro, IFS, and PHDWin. Languages include fluent French.

Production Engineer - P802

Production Engineer with bachelor's degrees in petroleum engineering and international business/finance and five years of experience working for a major operator, a service company, and a construction firm. Managerial experience includes downstream projects (engineering design, proposal, and execution), new projects controls, and inventory purchasing and maintenance. Additional experience includes well design and optimization, AFEs, completion designs, well trajectory planning, artificial lift, nodal analysis, chemical EOR flooding, field execution oversight, rig-up supervision, field safety initiatives, economic analysis, and process improvement. Geographic areas worked include the Eagle Ford Shale, the Mancos Shale, and the San Juan basin. Computer skills include ARIES, AutoCAD, CMG, Compass, CygNet, DSM, MATLAB, PHDWin, Rodstar, SAP, Spotfire, SROD, and WellView. Languages include Spanish and Russian.

Production Engineer - P979

Production Engineer with a bachelor's degree in petroleum engineering and four years of experience working for a service company. Experience includes through-tubing fishing, conventional fishing, casing exit systems, well logging, inventory documentation, service operations management, and equipment inspection. Computer skills include ARIES, MaPS, SAP, SolidWorks, and WellView.

Production Engineer - P839

Production engineer with a bachelor's degree in petroleum engineering and five years of experience with independent exploration and production companies. Experienced in executing multiple, simultaneous completion and production projects for both conventional and unconventional reservoirs, having managed over 800 wells, increasing production and decreasing downtime through repairs and paraffin treating. Also experienced in identifying projects that reduce company costs and drive compliance and quality assurance. Proven maintenance of strong relationships with field personnel. Geographic experience includes the Permian Basin and mid-continent. Software proficiency in Spotfire, ARIES, OFM, Excel, StimPlan, 3D Frac Modeling, and Rodstar.

Production Engineer - P770

Senior Production Engineer with a bachelor's degree in petroleum engineering and 11 years of experience with major and small operating companies and with a major service company. Direct experience completing and analyzing data of wells with fiber optic technology (DTS/DAS). Heavily experienced in completions including planning, designing, and executing vertical and horizontal projects using state-of-the-art technology to improve horizontal reach. Also experienced in designing fracture programs using tracers to place and space wells in shale reservoirs. Experienced as a project leader and leader of engineering teams. Knowledgeable in writing procedures and post-project reports in the EagleFord and south Texas areas. Skilled in nodal analysis, reservoir estimation methods, and well testing. Software proficient with FracPro, Gohfer, Fekete WellTest and VirtuWell, WellView, OptiCem, WellCat, and WellPlan with exposure to other well analysis software. Well Control Certified 2015.

Production Engineer - P887

Production Engineer with a bachelor's degree in civil engineering and seven years of experience working for a major operator and a service company. Experience includes project management for unconventional exploration projects, multidisciplinary team leadership, well strategy development, well spacing and stacking, completion design, stimulation design optimization, hydraulic fracturing technical management, fracture modeling and DFIT workflows, field deployment of mappable proppant and DTS/DAS data acquisition through carbon rod, subsurface characterization, well performance evaluations, field experiments, and technology implementation. Geographic areas worked include Calgary, the Delaware basin, the Haynesville Shale, the Permian, and Texas.

Production Engineer - P975

Production Engineer with a bachelor's degree in petroleum engineering and three years of experience working for a small independent operator. Experience includes new play evaluation, reserves evaluation, AFEs, cost monitoring, LOE reduction, horizontal completions design and execution, production management, drilling procedure optimization, ESP optimization, artificial lift design, hydraulic fracturing design, saltwater disposal wells, workover operations, contract and vendor evaluation, and plug and abandonment. Geographic areas worked include the Marcellus, the Powder River basin, and east Texas. Computer skills include AFEMS, AutographPC, Avocet, Cygnet, Echometer, Production Explorer, Spotfire, SROD, Total Well Management, and WellView.

Production Engineer - P464

Production Engineer with a bachelor's degree in petroleum engineering and 22 years of experience in international upstream oil and gas operations. Experienced with project development, construction, installation, and operational issues in remote locations. Recent experience includes the oversight of engineering, fabrication, and installation for modifications to a Gulf of Mexico facility to add a high-pressure gas train and water knock out system, replace a glycol system, and add a low pressure test system. Ask for P464.

Production Engineer - P878

Senior Petroleum Engineer with a bachelor's degree in aerospace engineering and 24 years of experience with major production and exploration companies. Experienced in production, completions, reservoir, and mechanical engineering, business development, operations management, production and system optimization, technical support and troubleshooting, workover identification and procedures, artificial lift evaluation and installation, production and well surveillance, production forecasting, project management, economics and AFE development asset strategy and planning, and process development and implementation. Experienced with all aspects of production in Oklahoma, Wyoming, and the Gulf of Mexico, including deepwater projects, vertical and horizontal wellbores, high H2S, CO2, and all pressure depletion environments. Software proficiency includes Prosper, Petra, PEEP, OpenWells, DSS, IHS Energy Data, StimPlan, Open Enterprise Real Time Automation Systems, and Spotfire.

Production Engineer - P857

Senior production and completions engineer and manager with a master's degree in petroleum engineering and over 35 years of experience with two independent oil companies. Detail- and technology-oriented professional skilled in asset management, reservoir engineering and simulation, completions, production, and fracture stimulation in conventional and unconventional resources. Experienced advisor and manager of completions team ensuring sound engineering concepts and practices were employed, aligning with company values, and protecting company assets, people, and environment. Collaborated with other disciplines, including reservoir, production, land, and corporate planning, optimizing use of capital and ultimate recovery. Diagnosed and developed solutions for trouble wells, including casing restrictions, casing leaks, and sustained annular pressures, allowing completion of wells and capture of reserves in inaccessible sections of reservoir. Geographic areas worked include the Permian Basin, Rocky Mountains, and most recently the Eagle Ford shale. Software proficiency in ARIES, PHDWin, FracPro, Wellview, Spotfire, WEM, Rose Risk Analysis Suite, and others.

Production Engineer - P903

Senior Petroleum Engineer with a bachelor's degree in petroleum engineering, a master's degree in business administration, and over 30 years of experience with medium sized independents. Experienced in production operations and drilling and completion design and operations including overall field management, controlling costs, increasing efficiency, and reducing surface and downhole failure rates. Also extensively experienced in management and field supervision with special expertise in artificial lift design, CO2 flooding, waterflooding, workovers, and fracturing. Geographic areas worked include Mississippi, Louisiana, and Texas, including the Permian Basin.

Production Engineer - P654

Production Engineer with a bachelor's degree in petroleum engineering and four years of experience with a major and a large independent. Experienced in production optimization for a large waterflood with over 800 wells, including monitoring real-time production, supporting corrosion programs, monitoring reservoir sweep efficiency, and optimizing artificial lift and chemical programs. Also experienced working with field personnel to ensure that wells are repaired in the most cost-effective manner by adjusting well procedures. Geographic areas worked include the Permian Basin. Knowledgeable to proficient in WellView, RODSTAR, XDIAG, Cbalance, OFM, Snap, PROSPER, MOC, SAP, XSPOC, DSM, Avocet, and Cygnet. Fluent in Italian and Tigrigna (Ethiopia).

Production Engineer - P861

Petroleum Engineer with a bachelor's degree in petroleum engineering and nine years of experience, including seven years of production engineering and two years of reservoir engineering with a major oil company. Experienced in artificial lift methods, reservoir management strategies, hydraulic fracturing design, rig workover planning, surface facility constraints, engineering economics, and regulatory compliance. Geographic areas worked include Alaska and Texas. Proficient in SCADA, WellView, PEEP, RODSTAR, XSPOC, and Centrilift AutographPC.

Production Engineer - P478

Production Engineer with a bachelor's degree in petroleum engineering and more than 30 years of experience working for major operators, and large independent companies. Experienced in supervision of contract lease operators and vendors, AFE preparation, permitting with government agencies, design of drilling and completion procedures, design of central gathering facilities, and wellsite supervision of drilling, completion, pipeline, and workover operations. Geographic areas worked include North Dakota, and the Rocky Mountain Region.

Production Engineer - P919

Senior level production engineer with a bachelor's degree in petroleum engineering and eight years of experience with large service companies in roles of progressively increasing responsibility. Experienced in complex completion design for fractured completions and in integrating the results into major field optimization reviews. Also highly expert in completion execution managing large and complex hydraulic fracturing operations comprising multiple operators, massive equipment, and numerous vendors. Accustomed to performing within a fast-paced, deadline-oriented working environment. Experienced in the Utica, Marcellus, Haynesville, Eagle Ford, Bakken, Marmaton, Woodbine, Cotton Valley, Travis Peak, Bossier Sand, James Lime, Pettit Lime, and various formations in the Permian including the Spraberry, Wolfcamp, and Bone Springs. Software expert in FRACPRO and Spotfire.

Production Engineer - P902

Senior Petroleum Engineer with a master's degree in petroleum engineering and over 30 years of experience with a major and a large independent. Experienced in integrated production modelling, flow measurement and allocation, sand-face completion design, water injection, artificial lift, production chemistry, flow assurance, and transient flow modelling. Significant operations and field management exposure with expertise in HSE and operations management systems and SAP production systems. Proven people and organization management skills at a senior level and skilled in competency management, training, and people development. Geographic expertise includes the deepwater Gulf of Mexico, Australia, US shale plays, and other international locations. Software proficiency includes PROSPER, GAP, and OLGA.

Production Engineer - P673

Production and drilling engineer with a master's degree in drilling and well engineering and seven years of experience with two large independents. Experienced managing field production, projects, budgets, and operations. Proficient in surveillance of wells, data evaluation, IPR well and well modeling, decline curve analysis, recompletions, and workovers, especially wireline operations, plunger lift, gas lift, pumping units, velocity string, capillary string, and plug and abandonment operations. Further recently experienced in HPHT drilling and completion operations and rig supervision. Geographic areas worked include east Texas and Iraq.

Production Engineer - P898

Completion and Well Intervention Engineer with a bachelor's degree in petroleum engineering and two years of experience with a major oil company. Experienced in optimizing production by: creating a program to fix sucker rod and electric submersible pumps, implementing a tubing refurbishment plan via testing and research, and creating a corrosion QA/QC plan for used tubing via analysis of tubing qualities and types. Also experienced in contract restructuring for plugging and abandonment, identifying cost savings opportunities by monitoring daily operational costs, and conducting safety audits in the field for workover rig operations. Software experience includes Excel, Word, SAP, WellCat Modeling, AutoCad, SolidWorks, PIPESIM, and CMG's IMEX.

Production Engineer - P461

Production Engineer with a bachelor's degree in petroleum engineering and over 30 years of experience working for small-to-large independents, a major operator, and service companies. Experienced in nodal analysis, well log analysis, regulatory compliance, production optimization, workovers, completions, wireline operations, production operations management, and facilities design and construction. Geographic areas worked include Texas, Louisiana, and Mississippi.

Production Engineer - P542

Engineering Manager with a bachelor's degree in petroleum engineering and 27 years of experience working for small and large independents and a major operator. Experienced in budgeting, cash flow analysis, contract negotiations, partner relations, and economic analysis. Additionally experienced in reserve reporting, production monitoring and optimization, acquisition evaluation, and remedial well work. Geographic areas worked include Oklahoma, Texas, Louisiana, Mississippi, the Gulf of Mexico shelf and deepwater, Brazil, and Indonesia.

Production Engineer - P891

Senior Production Engineer with a master's degree in reservoir engineering and 12 years of experience with major service companies. Experienced in conventional and unconventional reservoirs spanning the US and international locations, predicting and optimizing future performance using reservoir simulation. Also experienced with hydraulic fracturing design and simulation. Has performed oil well testing with coiled tubing in an artificially lifted well, been an instructor for well services, been a technical advisor for deepwater GOM abandonment operations, and conducted reservoir evaluation using probabilistic SPE and SEC reserve definitions using simulation and decline curve history matching and forecasting models. Software proficiency in CMG, Eclipse/Petrel, and Petrel RE.

Production Engineer - P808

Senior production engineer and operations manager with a bachelor's degree in mechanical engineering, an MBA, and 14 years of experience with a major oil company. Expert in production optimization in horizontal and vertical wells throughout the domestic United States. Recognized expert in artificial lift strategy and development with technical leadership and management skills, experience in managing operations at the field level, and in leading engineering teams in a coordinated effort to optimize new well production through technical evaluation of 150 wells per year. Geographic experience extends to Wyoming, San Juan and Permian Basins, and east Texas.

Production Engineer - P186

Senior production engineer with a bachelor's degree in petroleum engineering and 15 years of experience in engineering and project management with specialized service companies. Experienced in well intervention, wellbore schematics, cementing, well control, well abandonment and decommissioning, and project cost planning and control. Specially experienced managing complex, multi-faceted well abandonment projects involving cementing services, wireline operations, and coiled tubing and snubbing services to complete within assigned scope, timeframe, and budget. Knowledgeable in all applicable rules and regulations concerning safety and environmental policies and procedures.

Production Engineer - P300

Registered petroleum engineer with a bachelor's degree and 35 years of multi-disciplinary experience as a company owner, a consultant, and with a major oil company in a variety of international and domestic locations. Technically experienced at shallow and deep drilling at low and high temperatures and pressures and sweet and sour oil, gas, and condensate production. Skilled at production optimization, field revitalization, drilling design and supervision, workover and completion design and supervision, stimulation design and supervision, facility design and construction, and gas plant operations and optimization. Comfortable with all artificial lift systems. Onshore geographic areas worked include Texas, Alabama, Louisiana, Mississippi, and the Rockies. Offshore geographic areas include Texas, Alabama, Louisiana, and Thailand. Proficient with MS Office and MS Project. Familiar with nodal analysis, fracture simulation, and process simulation software.

Production Engineer - P404

Production Engineer with a bachelor's degree in chemical engineering and more than 30 years of experience working for small to large operators. Expert in artificial lift including ESP and gas lift. Additional experience in flowback operations, completions, multi-lateral wells, horizontal wells, sand control, budgeting, waterfloods, A&D programs, and mentoring. Geographic areas worked include Texas, Arkansas, Louisiana, the Gulf of Mexico, Argentina, Bolivia, Ecuador, Venezuela, and Indonesia.

Production Engineer - P369

Production Engineer with a bachelor's degree in petroleum engineering and over 30 years of oil and gas industry experience working for majors and mid-sized to large independent operators and consulting companies. Experienced in production optimization methods, drilling and completion techniques used in conventional and unconventional reservoirs, regulatory interpretation, and compliance consultation. Geographic areas worked include Michigan, Mississippi, New Mexico, southeast Oklahoma, east Texas, south Texas, Wyoming, and The Texas Gulf Coast area.

Production Engineer - P634

Production Engineer with a bachelor's degree in geology and 30 years of experience working for independents, a governmental office, and a service company. Experienced in well planning, workovers, recompletions, stimulation operations, artificial lift design, nodal analysis, budgeting, field supervision, and facilities installation and maintenance. Geographic areas worked include Texas, Louisiana, and the Gulf of Mexico shelf. Software proficiency in PROSPER and WEM.

Production Engineer - P599

Production Engineer with a bachelor's degree in petroleum engineering and over 30 years of experience working for small independents and as a consultant. Experienced in the planning and field supervision of drilling, completion, and workover operations. Additionally experienced in production operations management, prospect evaluation, lease acquisition, drill stem testing, reserve estimating, facility and pipeline construction, regulatory reporting, wellbore intervention programs design, and expert witness testimony. Geographic areas worked include south Texas, the Texas Gulf coast, the Illinois basin, and Bolivia. Licensed Professional Engineer in the State of Texas.

Production Engineer - P699

Production Engineering Manager with a bachelor's degree in petroleum engineering and 33 years of experience working for small to mid-size independents, major operators, and service companies. Experienced in completion engineering, production engineering, reservoir pressure depletion, flow assurance, production maintenance and optimization, and daily production and well integrity surveillance activities. Geographic areas worked include the deepwater Gulf of Mexico, western Australia, southeast Asia, West Africa and the Middle East.

Production Engineer - P800

Senior production engineer and manager with a bachelor's degree in mechanical engineering and over 25 years of experience with a major oil company and independents. Experienced managing reservoirs in both domestic and international operations onshore and offshore including production and reservoir engineering and in establishing and staffing international offices. Also experienced in working with outside operators on operating committees to jointly maximize the net present value of projects including creating and adjusting development plans. Developed production strategies, implemented construction, obtained government permits, and expedited initial production. Foreign assignments include New Zealand, Pakistan, Indonesia, Egypt, Gabon and Yemen with additional experience performing engineering responsibilities in Brazil, Peru, Hungary, Australia, Tunisia, Seychelles, Argentina and Turkey. Most recently experienced designing and executing fracturing operations in the Bakken.

Production Engineer - P726

Executive and registered petroleum engineer with a bachelor's degree in petroleum engineering, an MBA, and over 25 years of broad, in-depth experience with two major service companies. Expert in completion engineering, drilling and workover operations, strategy execution, establishing effective organizations, and change management. Proven ability to assess situations, defines clear strategies, plan resources, and execute to achieve operational and strategic objectives. Experienced in research and development, technical support, technical training, and customer service functions for production product lines including packers, flow control, safety systems, intelligent production systems, liner hangers, artificial lift, ESP systems, wellbore intervention, and flow assurance. Implemented patents and publications awareness program resulting in 11 patent applications and 14 technical papers during a two-year span. Geographic areas worked include lower Wilcox and Miocene completion designs for deepwater subsea completion projects.

Production Engineer - P43

Production engineer with a bachelor's degree in petroleum engineering and almost 30 years of experience in the service sector including over 20 years owning and operating technical specialty companies. Experienced in analyzing production and optimizing well performance. Extensively experienced with underground storage caverns, logging and mapping storage space in salt domes. A proven expert in business management having sold, installed, and serviced level detectors that continuously monitor the brine/product interface in caverns. Developed new tools and made several improvements. Wrote and presented technical papers. Very computer literate, and also very mechanically and electronically inclined.

Production Engineer - P721

Production Engineer with a bachelor's degree in petroleum engineering and six years of experience with a major oil company and a service company. Experienced in production monitoring and surveillance and well completion design with wellsite experience in well testing and drilling operations and field experience with surface production facilities. Advanced knowledge of gas lift and plunger lift, pressure transient analysis, casing and tubing design, and torque & drag modeling. Geographic areas worked include Texas and the deepwater Gulf of Mexico. Software proficiency in PanSystem, Wellcat, WellPlan, DecisionSpace Well Engineering, OpenWells, Excel, PHDWin, and Fekete Well Testing Software.

Production Engineer - P798

Senior Production Engineer and Operations Manager with 11 years of experience working for small and large independents in both conventional and unconventional developments. Experienced in generating and executing expense budgets and in contributing to and executing capital budgets in excess of $40MM and $100MM, respectively. Also experienced in supervising production engineers and field operations personnel in assimilating acquisitions and optimizing production of more than 500 wells including participating in the evaluations of the acquisitions themselves as well as planning of the recompletions, workovers, including stimulation work, and facilities maintenance and improvement. Geographic areas worked include Texas and New Mexico as well as the mid-continent. Software includes PROSPER, ARIES, and other drilling and data retrieval software.

Production Engineer - P793

Production Engineer with a bachelor's degree in petroleum engineering and 34 years of experience working for small to large E&P companies. Expertise in thru-tubing remedial and recompletion operations. Experienced in nodal analysis, new well completions, gas lift re-design, casing repair, well optimization, sand control, acid stimulation, completions design, and staff mentorship. Geographic areas worked include the Gulf of Mexico shelf. Software proficiency in ARIES, WEN, Perform, OWL, and Rio.

Production Engineer - P805

Production Engineer with a bachelor's degree in petroleum engineering and four years of experience with independents. Experienced in advanced data management including implementing a production dashboard for remote daily production monitoring by engineers. Also experienced in hands-on field operations, optimizing production through various methods including fluid level analysis, pump teardown reports, and variance reports, and designing remedial workovers on pumping wells. Geographic experience is the Bakken in North Dakota, and computer proficiency is high in Excel.

Production Engineer - P764

Senior Production Operations and facility engineer with a bachelor's degree in petroleum engineering and 35 years of experience with majors, independents, and gas transmission companies. Experienced in optimizing production by preparing project procedures for artificial lift installations, recompletions, rod pump designs, and remedial chemical treatments including management of deep, high pressure and sour gas wells and wells with high CO2 content. Also experienced in surface facility installations including design, safety, and AFE preparation and cost management, including gathering systems. Proficient in managing multiple projects and in training and mentoring younger engineers while in a management role. Geographic areas worked include Texas, Oklahoma, Kansas, and New Mexico. Proficient in Hysis, PipeSim and other related software.

Production Engineer - P152

Executive with a master's degree in engineering and over 30 years of oil and gas industry experience working for small, mid-sized, and large E&P companies. Experienced in production engineering and operations, in management and investment decision making in the areas of drilling, recompleting, well servicing, and reducing operating expenses. Additionally experienced in managing teams, building technical teams, and implementing new procedures and processes. Geographic areas working include mid-continent, offshore Louisiana, Brazil, West Africa, and Vietnam.

Production Engineer - P794

Operations Executive with bachelor's degree in petroleum engineering and over 35 years of experience with large and small independents and with a consulting company. Broadly experienced in drilling, reservoir, and improving staff productivity in the oil and gas industry. Engineering experience in the Permian Basin, Ft. Worth Basin, southeast Texas, Louisiana, and New Mexico. Committed to cost-effective management of resources and quality performance. Also experienced in production operations, drilling engineering and management, and reservoir engineering, including conventional and unconventional as well as horizontal and HPHT projects. Knowledgeable in business development, process improvements, artificial lift, and compression. Personable manager with proven ability to turn around underperforming programs to highly profitable ones.

Production Engineer - P234

Production and Business Development Engineer with a bachelor's degree in petroleum engineering and 26 years of experience with oil and gas service companies. Strong background in developing markets for well construction, expandable tubulars, mud logging, surface and downhole testing, directional drilling, and logging while drilling products. Also experienced in completion design, including sand control. Proficient in MS Office and engineering applications. Geographic experience in Latin America.

Production Engineer - P86

Production engineer with 19 years of experience working for a major oil and gas company. Highly experienced in workover operations and completions, including gravel packing, coiled tubing, gas-lift systems, and equipment selection. Highly skilled in facility operations including design of gathering system, pipeline/flowline sizing, and gas dehydration. Experienced in project engineering and project management. Geographic areas worked include the Louisiana Gulf coast. Computer skills include OilWat, GasWat, Workbench, Gruy, Primavera Project Management, ProPipe, ProFlow, ProIso, PipePhase, AutoCAD, Production Analyst, PI/Dwight's, ARIES, and Microsoft Office. Knowledgeable in Basic and VisualBasic programming.

Production Engineer - P787

Completions Engineer with a master's degree in mechanical engineering, a bachelor's degree in petroleum engineering, and over 25 years of experience in the oil and gas industry working for mid-sized to large operating companies. Experienced in design and implementation of completions, recompletions, workovers, and well interventions. Specialist in gravel packs, and frac packs, including open hole horizontal completions as well as gas lift optimization and well interventions. Recent experience includes management of an engineering team that completed 30 rig projects per year. Geographic areas worked include the Gulf of Mexico shelf and deepwater.

Production Engineer - P767

Production Engineer with a bachelor's degree in petroleum engineering, an MBA, and 28 years of experience working for a large independent. Experienced in asset management, prospect evaluation, budgeting and planning, reserves evaluation, production operations, completions, and production and reservoir engineering. Geographic areas worked include the Gulf of Mexico shelf, Texas, Louisiana, and Mississippi. Software proficiency in Peep, WEM, OFM, DynaCap, and RIO.

Production Engineer - P698

Production Engineering Manager with a bachelor's degree in aeronautical engineering and 30 years of experience working for small to mid-size independents, major operators, and service companies. Expert in field development planning and implementation, production operations and optimizations, and subsurface technical assurance. Experienced in petroleum engineering and well and completion technology. Geographic areas worked include the deepwater Gulf of Mexico, western Australia, the North Sea, and the Middle East.

Production Engineer - P766

Production Engineer with a bachelor's degree in petroleum engineering and two years of experience working for a small operator. Experienced in engineering, drilling, and fracturing in a multi-well-pad operation; modeling fluids for downhole applications; formation damage control; team training; cased-hole wireline operations; and wireline procedure drafting. Geographic areas worked include North Dakota and New Mexico. Software proficiency in FracPro.

Production Engineer - P761

Production Engineer with a bachelor's degree in mechanical engineering and more than 30 years of experience working for major operators and a service company. Experienced in preparing AFEs, writing P&A procedures, executing well interventions, providing operational and technical support to well site leaders, preparing cost estimates, evaluating, writing, and reviewing well integrity for remediation; and designing and installing artificial lift systems. Geographic areas include Texas and North Africa. Registered Professional Engineer in the State of Texas.

Production Engineer - P472

Petroleum Engineer with bachelor's degrees in petroleum engineering and computer science and more than 30 years of experience working for national oil companies and a service company. Experienced in providing integrated field development solutions, well modeling and design, multiphase surface and system optimization, reservoir analytical simulation, reservoir fluid characterization, and production data analysis. Geographic areas worked include the U.S., the Caribbean, Mexico, South America, the Middle East, and Asia. Software proficiency in PROSPER, GAP, MBAL, PVTP, OFM, Saphir, F.A.S.T., Oracle, and SQL. Language fluency in Spanish and English and a basic command of French, Portuguese, and German.

Production Engineer - P750

Production Operations Engineer with a bachelor's degree in petroleum engineering and three years of experience working for a large service company. Experienced in hydraulic fracturing, cross-linking, fluid efficiency testing, step-down analysis, drill collar inspection, torque unit testing, and assembly of rotating heads. Also experienced with performing pumping diagnostics to evaluate possible changes to the well design. Geographic areas worked include Texas, Pennsylvania, and North Dakota.

Production Engineer - P757

Production Engineer with a master's degree in chemical engineering, an MBA, and 15 years of experience working in several industries, the most recent two in oil and gas with a major operator. Experienced in optimizing production, identifying and managing workovers, executing artificial lift programs, managing recompletions, forecasting production, hydraulic fracturing, and equipment installation. Geographic areas worked include the San Juan basin.

Production Engineer - P678

Completions Engineer with a master's degree in petroleum engineering and more than two years of experience working for a major service company. Experienced in cased-hole, gravel pack completions and stand alone completions. Additionally experienced in pumping and completion design. Geographic areas worked include California, Vietnam, Malaysia, and Thailand. Software proficiency in TUBEMOVE, XOT Move, Advantage, and ABPaq.

Production Engineer - P748

Production and Reservoir Engineer with a bachelor's degree in chemical engineering and eight years of experience working for a mid-sized operator. Experienced in asset development, field operations, production optimization, completions, and well and pipeline integrity program implementation. Additionally experienced in economic analysis, reserve evaluation, financial modeling, benchmarking, A&D, and strategic planning. Geographic areas worked include Canada. Software proficiency in geoSCOUT and Val Nav. Licensed Professional Engineer by APEGA.

Production Engineer - P576

Completions Engineer with a master's degree in petroleum engineering and 31 years of experience working for operators, service companies, consulting firms, and as an independent consultant. Expertise in completion engineering including high rate water pack, gravel pack, recompletions, decompletions, subsea completions, and stacked completions. Additionally experienced in providing completion interface requirements for rig selection, preparing detailed well cleanup, testing, and completion procedures; and preparing functional and technical specifications for completion components. Geographic areas worked include Texas, Louisiana, the Gulf of Mexico deepwater, offshore Brazil, Trinidad, Vietnam and China; Venezuela, and Africa.

Production Engineer - P796

Production Engineer with a bachelor's degree in petroleum engineering and two years of oil and gas experience working for a mid-sized independent and a major service company. Experienced in fracturing operations, safety, quality assurance/control, sedimentology and stratigraphy, well log analysis, and geostatistical analysis. Geographic areas worked include Northern and Central Rockies and New Mexico. Software proficiency in ARIES, OFM, ArcGIS, FRACPRO, INSITE, Fekete Harmony, SolidWorks, Mathematica, and Microsoft Office.

Production Engineer - P652

Production Engineer with a bachelor's degree in mechanical engineering and 23 years of experience working for mid-sized to large operators and service companies. Experienced in completions, workovers, production, production operations, fracture design, costing, and failure analysis. Geographic areas worked include North Dakota, New Mexico, Colorado, Texas, Louisiana, and the Gulf of Mexico.

Production Engineer - P631

Production Engineer with a bachelor's degree in petroleum engineering and three years of experience working for a large independent oil and gas company. Experienced in production and completions operations including developing well procedures, designing fracture projects, executing recompletion and workover plans, and developing depletion plans. Geographic areas worked include west Texas and Louisiana.

Production Engineer - P473

Petroleum engineer with 23 years of progressive engineering experience, both domestic and international with a major oil company and as an independent consultant. Recognized by peers as an ‘early-adopter' and champion of new technology. Highly skilled at well stimulation design and optimization; water control in producing and injection wells for enhanced recovery; well test and productivity evaluation; production optimization and problem solving; and integrating reservoir, production, and completion engineering practices. Geographic experience includes the Burgos Basin in Mexico, Algeria, Texas and New Mexico. Computer skills include MS-Office (Word, Excel, PowerPoint) as well as several specialized industry software packages such as Saphir [pressure transient analysis], Emeraude [production logging], the Meyer suite of software [fracturing and production evaluation], WEM, Prosper [nodal analysis], and RodStar [artificial lift].

Production Engineer - P625

Production Engineer with a master's degree in petroleum engineering and seven years of oil and gas experience working for small to large independents. Experienced in horizontal completions, unconventional plays, workover design, nodal analysis, permitting, vendor relations, AFE preparation, project management, budget analysis, and waterflood and CO2 flood operations. Geographic areas worked include Montana, Mississippi, Louisiana, Alabama, and the Gulf of Mexico. Software proficiency in WEM.

Production Engineer - P438

Completions Engineer with a master's degree in petroleum engineering and 27 years of experience working for operators and service companies. Expert in completion engineering including fracturing, sand control, equipment selection, completion design, procedure writing, vendor management, and perforation design. Additionally experienced in economic analysis, nodal analysis, reserve analysis, decline curve analysis, and volumetrics. Geographic areas worked include the Gulf of Mexico, Texas, Virginia, Kentucky, Australia, Canada, Columbia, Egypt, Indonesia, Trinidad, Russia, and Iraq. Software proficiency in WEM.

Production Engineer - P414

Production Engineer with a bachelor's degree in mechanical engineering and 31 years of oil and gas experience working for major E&P and state oil companies. Experienced in completions, stimulation, production optimization, artificial lift, and workovers. Geographic areas worked include Colorado, Montana, Washington, Michigan, California, west Texas, and Oman. Computer skills include SCADA and Microsoft Office.

Production Engineer - P737

Production Engineer with an MBA in energy and finance and eight years of experience working for large oil and gas service companies. Experienced in unconventional well completions, PVT analysis, artificial lift, reservoir surveillance, HSE, economic evaluations, nodal analysis, production optimization, fiber optics/DTS, and ESP systems. Geographic areas worked include the Williston, Bighorn, Powder River, and Los Angeles basins. Proficiency in Microsoft Project, Cygnet, SAP, Monte Carlo Simulation, SPSS, FactSet, Bloomberg, C/C++, DesignPro, AutographPC, and AutoCAD. Language fluency in Spanish, Hindi, and Oriya.

Production Engineer - P733

Production Engineer with a bachelor's degree in petroleum engineering and two years of experience working for service companies and an operator. Experienced in well surveillance, well database maintenance, well file maintenance, prospect generation, generating well location plats, and filing Texas RRC forms for surface casing exceptions and wellbore commingling. Additionally experienced in hydraulic fracturing of vertical and horizontal wells and supervising fracturing crews. Geographic areas worked include Texas, Louisiana, Brunei, and Malaysia. Software proficiency in ArcGIS, Drillinginfo, and HIS.

Production Engineer - P616

Production Engineer with a bachelor's degree in petroleum engineering and over 30 years of experience working for major and small independent operating companies and a service company. Expert in operations, construction, and management of producing facilities, especially offshore. Experienced in hurricane damage repairs, pipeline installation, gas compressor design, gas lift optimization, well completions, historical production reconciliation, and contribution to acquisition evaluation analysis. Also experienced in the management of sour gas facilities including design and construction as well as in management of contractor operations. Geographic areas worked include the Gulf of Mexico, Louisiana, Alabama, and Florida.

Production Engineer - P674

Production Engineer with a bachelor's degree in general science and 41 years of experience in the oil and gas industry working for majors, independents, and as a consultant. Experienced in exploration, completion, supervision, work overs, oilfield management, and asset evaluation. Geographic areas worked include Oklahoma, Texas, Kansas, Louisiana, Mississippi, North Dakota, Arkansas, New Mexico, Corpus Christi bay, Mesquite bay, Blanche bay, the Permian Bbasin, and the Ardmore basin. Software proficiency in PhD Win, Power Tools, PI/Dwights, Drillinginfo, HPDI, and SONRIS Lite.

Production Engineer - P434

Production Engineer with 35 years of experience as an oil and gas generalist. Comprehensive background in all aspects of drilling, completion, workover, reservoir management, petrophysical evaluations, economic evaluations and sales. Highly skilled in all aspects of production engineering. Knowledgeable in safety and safety training. Geographic areas worked include south and east Texas, New Mexico, and Louisiana.

Production Engineer - P36

Production and reservoir engineer with 31 years of experience in the oil and gas industry for large independents. Over four years of reservoir and production engineering experience in an integrated team environment. Experience in reservoir engineering included well proposals, reserve reviews, and strategic budget planning. High degree of experience in workover program direction, production management, and new completions primarily in the Miocene, Frio, and Wilcox formations. Primary experience is in the south Texas and Texas Gulf coast areas. Computer skills include ARIES, Workbench, SAM, Perform, Toolkit, OGRE, and others.

Production Engineer - P647

Production Engineer with a bachelor's degree in petroleum engineering and five years of oil and gas experience working for large and small independents. Experienced in production optimization of shale plays, writing AFEs, minimizing and managing lease operating expenses, identifying field and well workover candidates, and consulting on fracturing jobs. Geographic areas worked include Texas and Oklahoma. Software proficiency in PERFORM, SNAP, and WEM.

Production Engineer - P394

Production Engineer with a bachelor's degree in petroleum engineering and 28 years of oil and gas experience working for large independents and a service company. Experienced in artificial lift design, risk analysis, tender preparation, personnel supervision, completions, workovers, waterfloods, and casing evaluation. Geographic areas worked Columbia, Peru, and the country of Georgia. Computer skills include GAP, MBAL, PROSPER, and Subpump. Fluent in Spanish.

Production Engineer - P682

Operations Engineer with a bachelor's degree in petroleum engineering and more than 30 years of experience working for small to mid-sized independents. Experienced in production operations, drilling operations, completions, recompletions, permitting and regulatory matters, well analysis, and field analysis. Geographic areas worked include Mississippi, Louisiana, Texas, New Mexico, Arkansas, Oklahoma, Kansas, Wyoming, and North Dakota. Software proficiency in Field Direct.

Production Engineer - P695

Completions Engineer with a master's degree in petroleum engineering and seven years of experience working for service companies. Experienced in fracture diagnostics, fracture mapping, fracture growth model calibration, fracture optimization, and micro-seismic report preparation. Additionally experienced in tracking project expenses and margins, analyzing and interpreting subsurface mapping processes, supervising wellsite stimulation projects, and mentoring engineers. Geographic areas worked include the Eagle Ford, Bakken, Marcellus, Barnett, and Wolf Camp shale plays. Software proficiency in FracCADE, PIPESIM, Welltest, PinnVision, ProCADE, Fracpro, LGZones, DECIDE, and Terravista.

Production Engineer - P503

Completions and Production Engineer with a bachelor's degree in natural gas engineering and twelve years of experience working for large and major operators as well as service companies. Experienced in stimulation design and execution, well planning, economic evaluations, risk analysis, production optimization, and production forecasting. Additionally experienced in managing multi-disciplinary teams on projects around the world serving as project manager, completions team lead, R&D implementation team lead, and frac crew supervisor. Geographic areas worked include the deepwater Gulf of Mexico, offshore Israel, and Russia. Software proficiency in Petrel, HYSYS, MFrac, StimPlan, WellView, PI Dwights, FracPro, Crystal Ball, PROSPER, and Predict.

Production Engineer - P474

Petroleum Engineer with over 20 years of operational, technical, and financial experience. Experienced at onshore and offshore drilling and production operations and reservoir and geological engineering. Demonstrates strong leadership, interpersonal skills, and problem-solving abilities. Skilled at implementation, forecasting, contract negotiations, expense control, P&L responsibility, proposal preparation, and start-up operations. Geographic areas include Texas, Louisiana, the Gulf of Mexico, and the San Juan Basin. Computer skills include MS Office, including creating templates for engineering, operations, and administrative functions.

Production Engineer - P223

Reservoir Engineering Advisor with a bachelor's degree in chemical engineering and 15 years of experience working for small to mid-sized independents and managing a consulting firm. Expert in acquisition evaluations and reserve valuations including assisting with transactions and due diligence, sourcing and evaluating deal flow, advising on negotiated transactions, and monitoring activity for non-operated interests while maintaining technical relationships with operating companies. Additionally experienced in reservoir studies, field development, and new well completion and workover oversight. Geographic areas worked include Texas, Louisiana, New Mexico, and the Rocky Mountains. Software proficiency in ARIES, OGRE, PHDWin, Petra, Power Tools, and Enerdeq. Registered Professional Engineer in the State of Texas.

Production Engineer - P295

Production Engineer with a bachelor's degree in mechanical engineering and 22 years of experience working for operators and a service company. Experienced in operations management, contract negotiations, budget oversight, and new business development. Additionally experienced in procedure design, on-site engineering supervision, risk assessment, regulatory compliance, AFE design, and permitting. Geographic areas worked include Texas, Louisiana, Mississippi, and New Mexico.

Production Engineer - P688

Petroleum Engineer with a bachelor's degree in petroleum engineering and two years of experience working for an operator. Experienced in designing and supervising drilling programs and completion and workover procedures including multi-stage horizontal plugging and perforation, fracture design, coil tubing, workover rigs, wireline, and hydraulic and beam pump design. Geographic areas worked include south Texas Gulf coast, Texas, and Louisiana. Language proficiency in English.

Production Engineer - P686

Production Engineer with a bachelor's degree in petroleum engineering and five years of experience working for an operator and a service company. Experienced in production surveillance, design and implementation of workover and completion procedures, nodal analysis, artificial lifts, and generating AFEs. Geographic areas worked include New Mexico and the Delaware basin. Software proficiency in PHDWin, FracPro, MFRAC, PETRA, and Fekete Nodal Analysis. Language fluency in English.

Production Engineer - P546

Production Engineer with a bachelor's degree in mechanical engineering and 12 years of experience working for a state oil company and a large service company. Experienced in production simulation, field studies, portfolio and project economics, field development, electric submersible pump design and operations, and production log analysis. Additionally experienced in waterflood and gas injection projects. Geographic areas worked include Venezuela and Alaska. Software proficiency in PROSPER, GAP, PIPESIM, and SubPUMP.

Production Engineer - P154

Reservoir and Production Engineer with 32 years of experience working for operators, R&D companies, and engineering consulting firms. Experienced in reservoir characterization, reservoir modeling, and CO2 sequestration. Additionally experienced in production and operations related to exploitation, drilling, production, and management of petroleum and natural gas resources. Geographic areas worked include Texas and New Mexico. Software proficiency in CMG and GeoSuite software. Licensed Professional Engineer in Texas. Certifications include Project Management Professional.

Production Engineer - P333

Petroleum engineer with a Bachelor's Degree and six years of experience, both domestic and international. This experience includes high pressure and high temperature wells, rig and rig-less workovers, sour oil and gas production operations, artificial lift systems, well site supervision, water-floods, miscible gas floods, and tight gas experience. Skilled at well site supervision in a high pressure, high temperature (HPHT) environment on well intervention projects, including coiled tubing, electric line, slick line, slick line fishing, and well testing. Extensively experienced in preparing AFEs and workover procedures. Geographic areas worked include the east Texas basin and various basins in eastern Venezuela.

Production Engineer - P95

Production engineer with a Bachelor's degree and 21 years of experience with large and small producing companies. Experienced in drilling and completion engineering and operations, artificial lift systems, and surface facilities. Expert in management of primary, secondary, and tertiary recovery projects. Skilled in providing detailed cost estimates, economic justification, and budget projections. Geographic areas worked include the Rocky Mountain and Gulf coast states, Michigan, and Indiana. Computer skills include MS Office, Lotus 1-2-3, Freelance Graphics, SAM, and Dwight's/P.I.

Production Engineer - P560

Production Operations Engineer with a master's degree in engineering and 12 years of experience working for an independent operator and service companies. Experienced in downhole operations, surface operations, open-hole completions, cased-hole completions, stimulation operations, fracture operations, fishing operations, plug setting, and research and development in tool improvement. Additionally experienced in vendor selection and oversight, regulatory compliance, personnel management, resource allocation, and sales presentations. Geographic areas worked include the Gulf of Mexico, the U.S., Mexico, Venezuela, and Nigeria.

Production Engineer - P664

Production Engineer with a bachelor's degree in petroleum engineering and four years of experience in the oil and gas industry working for a major service company. Experienced in nodal analysis, completion design of vertical, horizontal, and multi-lateral wells; supporting reservoir, production, and completions operations; and designing and implementing frac packs, gravel packs, and acid stimulation. Geographic areas worked include the Gulf of Mexico, North America, and Saudi Arabia. Software proficiency in NETool, WellFlo, PROSPER, Saphir, VirtuWell, and StimPlan.

Production Engineer - P127

Petroleum engineer with a Bachelor's degree and 25 years of experience working in reservoir, production, and drilling projects. Experienced in workover operations, drilling operations, coiled tubing operations, reservoir simulation, reserve estimation, field studies, portfolio and project economics, field development, gas-lift design and operations, all types of artificial lift, and production log analysis. Geographic areas worked include the Austin Chalk, the San Juan Basin, the Permian Basin, and the Gulf of Mexico. Proficient in various computer programs including Microsoft Office, Lotus 1-2-3, and Virtual Basic. Highly skilled in the use of WEM, GASWAT, Saphire, and OILWAT. Familiar with OGRE, PEEP, and Fortran.

Production Engineer - P639

Production Engineer with a bachelor's degree in petroleum engineering and 33 years of oil and gas experience working for mid-sized to large independent oil and gas companies. Experienced in unconventional exploration, field development implementation, well completion, production optimization, production forecasting, pipeline and facilities design, and reservoir evaluation. Geographic areas worked include Oklahoma, Kentucky, Ohio, Virginia, Indiana, North Carolina, West Virginia, Spain, Germany, South Wales, Poland, the Czech Republic, and South Africa. Software proficiency in ARIES, PROMAT, SAPHIR, and PanSystem.

Production Engineer - P606

Production Engineer with a master's degree in petroleum engineering and 13 years of experience working for a large independent oil and gas company and a service company. Experienced in designing fracture systems for horizontal and vertical wells, optimizing completions designs, implementing screenless sand control technologies, supervising pinpoint completions operations, and executing stimulation operations. Geographic areas worked include North Dakota, California, Texas, Venezuela, and Colombia. Software proficiency in StimPlan, FRACPRO-PT, and Predict-K.

Production Engineer - P281

Engineer with a bachelors degree in petroleum engineering and more than 30 years of experience in operations, production, and drilling. Knowledgeable in light oil, deep, high-pressure reservoirs, and heavy oil, shallow, low-pressure reservoirs. Skilled in reservoir, production, and drilling projects. Experienced in reservoir management, completion techniques, stimulation, reserves estimation, field studies, AFEs and project economics, field development, artificial lift design and operation, and production log analysis. Proficient in various computer programs, including Microsoft Office, PA, DSS, PEEP, and FRACPRO.

Production Engineer - P37

Registered petroleum engineer with over 35 years of production engineering experience with a major oil and gas company. Most recently completed a position in charge of establishing and enhancing supplier relationships, helping customer-supplier teams identify cost reduction opportunities exceeding $15MM. Adept at all production engineering duties including log evaluation, completion design and other subsurface work. Geographic experience throughout east and west Texas includes waterfloods. Skilled at workover and completion/recompletion designs and production optimization. Have completed reserve evaluations for value determination. Fluent in Spanish.

Production Engineer - P596

Production engineer with a bachelor's degree in petroleum engineering and 19 years of diverse engineering and wellsite supervisory experience in drilling, completion, workover and recompletion operations. Skilled in cost control using a combination of improved engineering practices, vendor negotiations, slickline, coiled tubing, artificial lift and creative problem solving. Recent experience in CBM and HTHP tight gas production. Geographic experience includes offshore Gulf of Mexico, the Texas Gulf coast, Louisiana, North Dakota, South Dakota, Montana, and Rocky Mountains.

Production Engineer - P437

Production Engineer with 12 years of experience in operations and reservoir development engineering. Proven ability to handle increased responsibilities and challenging work environments. Results-oriented, motivated, and versatile, with outstanding project management skills. Geographic experience includes Wyoming, both tight gas and coalbed methane, east Texas, central Louisiana, and the Austin chalk of central Texas. Computer skills include DSS, PEEP, ARIES, DIMS, and MS Office. Ask for P437.

Production Engineer - P623

Production Engineer with a bachelor's degree in petroleum engineering and four years of oil and gas experience working for a mid-sized independent. Experienced in reviewing wells for workovers, performing nodal analysis, coordinating and supervising wireline work, BHP surveys, and gas lift revisions; and reviewing production volumes. Geographic areas worked include the Gulf of Mexico shelf and west Texas. Software proficiency in WEM, Peep, PHDWin, Petra, and OFM.

Production Engineer - P640

Production Engineer with a bachelor's degree in petroleum engineering and 33 years of experience working for large independents. Experienced in business process optimization, operations planning and budgeting, nodal analysis, completion design, production optimization, and best practices implementation. Geographic areas worked include the Gulf of Mexico shelf. Software proficiency in Peep, WEM, and OFM.

Production Engineer - P30

Production engineer with a bachelor's degree and 30 years of experience working onshore and offshore for major oil companies. Experienced in the design and preparation of stimulation, cement, and acid programs for onshore and offshore injection and gas wells, and planning, ordering, and preparing services, equipment, and materials needed to perform remedial work. Highly skilled in equipment selection and producing operations. Geographic areas worked include the Middle East and the United Arab Emirates. Computer skills include working knowledge of Microsoft Office, Lotus 1-2-3, dBase, and Production Analyst. Fluent in Arabic and French.

Production Engineer - P565

Production, facility, and operation engineer with a Bachelor's Degree and 26 years of experience both onshore and offshore. Experienced in drilling, production, and loss control. Skilled at facility design, installation, and maintenance; pipeline design and installation; platform installation and maintenance; well abandonment and workover; remedial well work; regulatory permitting; DOT pipelines compliance; compressor and power generating systems installation and operation; and meter station design and installation. Proficient in various computer programs including MS Office, MS Project, Outlook, ProCounts, JM Campbell, Lomax, and Hanover facility design software.

Production Engineer - P642

Production Engineer with a master's degree in petroleum engineering and 39 years of oil and gas industry experience working for service companies and national oil companies. Experienced in fracture treatment design and implementation, acid treatment design, water conformance design, well test analysis, reservoir modeling, cost estimating, and job proposal preparation. Geographic areas worked include Montana, Wyoming, North Dakota, Oklahoma, Texas, Denmark, Algeria, Kazakhstan, Russia, Argentina, and Australia. Software proficiency in Saphir, QuickLook, FracProPT, WEM, and ENSITE.

Production Engineer - P608

Production Engineer with a master's degree in petroleum engineering and two years of experience in the oil and gas industry working for major service companies. Experienced in cased- and open-hole logging, MWD operations, LWD operations, identifying workover candidates, and chemical remediation of wellbore damage. Geographic areas worked include Texas.

Production Engineer - P64

Production Engineer with a master's degree in civil and environmental engineering and more than 40 years of experience working for a major operator and as an independent consultant. Registered PE. Recognized expert in royalty relief for the federal government. Experienced in contract dispute resolution, contract negotiations, drilling training program development, and strategic planning. Also an experienced project manager for offshore and onshore developments, including decommissioning of offshore platforms. Geographic areas worked include Louisiana, Texas, and the Gulf of Mexico.

Production Engineer - P181

Production engineer with a bachelor's degree in nuclear engineering and mathematics with over 26 years of experience working for field service companies and major producers. Experienced in deepwater sand control completions design, specification, and execution; well completions design and troubleshooting, operations risk assessment, new product development, and major project management. Geographic areas worked include deepwater West Africa and deepwater Gulf of Mexico.

Production Engineer - P512

Materials Manager with a master's degree in finance and 22 years of oil and gas industry experience working for mid-size companies. Experienced in developing master service agreements, joint operating agreements, and contract administration with owners, operators and freight forwarders, bids, and developing strategic plans. Additionally experienced in tactical strategies to optimize supply chain efficiency, SOP and supply chain matrixes, SCM planning, preparing project close-out documents, equipment managing, and interfacing with project management, engineering, field operations. Geographic areas worked include Russia, South America, and the Middle East. Language fluency in Portuguese, Spanish, and French.

Production Engineer - P405

Petroleum engineer with a Masters Degree and 30 years international experience in production technology and drilling and operations engineering. Highly skilled in well construction design, installation, and repairs. Proven abilities to find practical and cost effective solutions, applying innovation where appropriate. Results focused, meeting deadlines while maintaining high quality standards. Proficient in production aspects of field development, reviews, refurbishment and production optimization processes. Geographic areas include Southeast Asia, Europe, and the Middle East, both in onshore and offshore operations. Computer skills include Microsoft Office, WellFlo, ReO, WellCat, WellView, Eclipse, and various geo-mechanical software.

Production Engineer - P581

Production/Reservoir engineer with a bachelor's degree in petroleum engineering and four years of oil and gas experience. Experienced with drilling fluids, completions, workovers, wireline, thru-tubing, and gas lift. Computer skills include Microsoft Office; CMG STARS; FRACADE; Optibridge; Loss Circulatio Advisor; PPS suite; SAPHIR; Eclipse; FORTRAN and VB. Geographic area worked is west Africa

Production Engineer - P433

Petroleum engineer with 27 years of technical and operational experience in offshore, onshore and inland waters areas. Knowledgeable in a wide range of exploration and production operations in the Gulf Coast, Rocky Mountain and California areas. Skilled at maximizing production while reducing operating costs. Enthusiastic and willing to work long hours in order to achieve needed results.

Production Engineer - P521

Completions engineer with a bachelor's degree in mechanical engineer and six years of experience with a service company. Experienced in sand control design, execution, and evaluation; matrix acidizing ( candidate identification and treatment design ), stimulation , production technology, filtercake clean up design, and sand control fluids. Expert in high-permeability rock. Geographic areas worked include offshore Gulf of Mexico and offshore Nigeria. Computer skills include Microsoft Office and various proprietary engineering software.

Production Engineer - P183

Petroleum Engineer with Bachelors of Engineering in Petroleum Engineering and over sixteen years in the oil and gas industry. Experience includes planning, budgeting, technical and financial evaluation of bids and execution including site supervision of bottom hole pressure survey, production / water monitoring test, logging, workover /completion and daily/ routine field production operations operated by PPL. Experience includes close liaison with Materials and Procurement Department including technical and financial evaluations of bids and tender documents, and the physical inspection of procured equipment to ensure that they fulfill company's specification and requirement. Computer experience includes extensive use of MS Office and other Petroleum Engineering Database/software.

Production Engineer - P320

Petroleum engineer with a Bachelor's Degree and ten years of experience both onshore and offshore. Experienced in preparing and witnessing workover and completion programs for natural and artificial lift wells using gas lift and electrical submersible pumps. Skilled at surveying well performance, identifying well problems, and advising on possible solutions. Comfortable with the interpretation of open-hole and production logging, and preparing and witnessing all programs related to acidizing, coil tubing, and slick lines jobs. Proficient in various computer programs including Microsoft Office, Harvard Graphics, Symphony, FloSys, and familiar with Prosper.

Production Engineer - P389

Petroleum engineer with a Masters Degree and over six years experience in the Venezuelan oil industry. Skilled in well productivity with a special emphasis in reservoir and waterflood development. Knowledgeable in reservoir, production, and drilling. Experienced in productivity, reserve estimation, field studies, project and portfolio economics, field development, design and operations, production log analysis, and pressure, nodal, and economic analysis. Geographic areas worked include eastern (land) and western (Lake Maracaibo) Venezuela. Proficient in various computer programs including Microsoft Office, FracCade, StimCade, Crystal Ball, MBAL, OFM, ARIES, PEEP, Fortran, and UNIX.

Production Engineer - P411

Petroleum engineer with eight years of experience in the petroleum industry. Experienced at energy efficiency, production of oil and gas, and reservoir engineering. Skilled in project management, particularly in setting up schedules. Geographic experience includes regions of the former Soviet Union. Computer skills include MS Office, MS Project, Visual Basic, and MS Front Page. Fluent in Serbo-Croatian and English.

Production Engineer - P321

Production engineer with a Master's Degree and nine years of oil and gas experience, the first two years with the Nigerian National Oil Company, and the remaining seven years with a major oilfield service company in Nigeria and the U.S. Highly experienced in coiled-tubing applications, stimulations, fracturing, sand clean out, and perforating. Highly skilled in logging, milling, recompletions, and fishing operations. Experienced working on live, high-pressure, high-temperature, and horizontal wells. Geographic areas worked include Nigeria, south Texas, south Louisiana, New Mexico, Wyoming, and the Gulf of Mexico. Computer proficient in MS Office, SAP, Visio, CoilCADE, StimCADE, Jet Adviser, Perform, and Welltest.

Production Engineer - P275

Petroleum engineer with a bachelors in mechanical engineering and 18 years of domestic and international experience in completion, production, and reservoir engineering. Experienced in implementing EOR projects, completions, workovers, well optimization, and artificial lift, including gas lift, ESP, PCP, and beam pumping. Skilled in project economics, reserves estimation, field development planning, and coordinating facilities design and construction. Geographic areas worked include Indonesia, Kazakhstan, China, and Canada. Proficient in Microsoft Office, Wellflo, PEEP, and Microsoft Project. Familiar with HYSYM.

Production Engineer - P367

Petroleum engineer with a Bachelor's Degree and seven years of experience. Skilled at well test and production logging interpretation, economic evaluation, and technical sales. Geographic regions worked include North and South America, Australia, and Europe. Proficient in Microsoft Office, Sapphire, Emerald, Peep, and Decision Tree. Fluent in Spanish and English.

Production Engineer - P346

Petroleum engineer with a Bachelor's Degree and 17 years of experience in Venezuela in reservoir engineering, production operations, and production engineering. Experienced in reservoir analysis, reserve estimation, field studies, portfolio and project economics, field development, stimulation design and operations, and production log analysis. Also experienced in the treatment of wells with paraffin, hydraulic fracturing of gas injectors and oil producers, operations of cleaning of wells with coiled tubing and snubbing, monitoring of secondary recovery reservoirs for injection of water and gas, and the use of Oil Field Manager for monitoring of reservoirs and production operations. Geographic areas worked include Anaco and Punta de Mata in Venezuela. Proficient in various computer programs including Microsoft Office, Lotus 1-2-3, PowerPoint, Excel, Wellflo, Fracade, and Stimcade.

Production Engineer - P80

Petroleum engineer with a Bachelor's degree and over 19 years of international experience with a major oil company and a large service company. Highly skilled in drilling engineering, well completions, workovers, contract administration, and production coordination. Highly experienced working as a team member for integrated reservoir management. Experienced with vertical, deviated, re-entry, and horizontal wells. Geographical areas worked include onshore and offshore Venezuela and Texas. Proficient in MS Office, Lotus 1-2-3, Freelance Graphics, and dBase. Fluent in Spanish.

Production Engineer - P314

Petroleum engineer with a Bachelor's Degree and 19 years of international experience in production and workover operations. Experienced in field production operations, well monitoring, and well optimization projects including preparation of well remedy programs, qualitative well log evaluations, well testing and interpretation, remedies to wells with paraffin and sand problems, artificial lift design and installations, water injection, and CO2 huff and puff projects. Geographic areas worked include Turkey, Kazakhstan, and Azerbaijan. Proficient in various computer programs including Microsoft Office and OFM.

Production Engineer - P97

Production engineer with Master's degree and 20 years of experience with two major oil companies and a service company. Adept at all phases of production engineering to improve well productivity and facilities operation. Skilled at nodal analysis, log analysis, and artificial lift; the design, and field implementation of stimulation, workover, completion, and recompletion; reserves estimation and forecasting; and budgeting. Experienced in field development programs, project studies, and telecommunication equipment. Geographic areas worked include the Gulf coast, west Africa, and Trinidad. Computer skills include MS Office, Lotus Smart Suite, Freelance Graphics, ARIES, OGRE, PEEP, WEM, Production Analyst, P.I., OFM, Prosper, and QLA. Fluent in French and Spanish.

Production Engineer - P91

Production engineer with a Bachelor's degree, and 18 years of experience in the oil and gas industry working for a major company, in drilling projects and field engineering operations. Experienced in monobore completions and in providing input and direction for strategic planning and volume forecasts. Highly skilled in field studies and development. Geographic areas worked include Alabama, Louisiana, Florida, Mississippi, Georgia, and Qatar.

Production Engineer - P29

Highly technical production engineer with a Bachelor's Degree and over 20 years of experience in research and consulting with a major oil company, a large independent, and as a consultant. A great deal of related experience in drilling and reservoir engineering enhances ability. Horizontal well experience, injection and storage experience, flow path determination using tracer technology, and fracturing techniques are the main areas of study and application. Highly experienced in the Appalachian basin with some Gulf coast and other domestic experience. Familiar with engineering computer applications including Sigma Plot, and VisioTechnical.

Production Engineer - P66

Hands-on production engineer with a Bachelor's Degree and seven years experience with a large oil company in Australia. Highly experienced in producing operations and remedial work, including fracturing, acidizing, coiled tubing operations, perforating, logging, and wireline operations. Also has designed and implemented several different types of pumping systems including electric submersibles. Experience comprises completion and remedial design, rig supervision, and installation of surface equipment. Proficient in PC applications including Microsoft Office and various design packages for production engineering.