• Engineering and Construction
• Executive
• Geoscience
• Land, Legal and Accounting
• Production Operations
• Subsurface Engineering
• Support (Administrative, IT, Business Development)

Engineering and Construction

Civil & Structural Engineer - CS268

Corrosion Engineer with a bachelor’s degree in mechanical engineering and 44 years of corrosion engineering, management, and field experience. Expert in translating needs, standards, and regulations into usable cost-effective systems for control of corrosion. Expert in extending the life of structures with proper design, material selection, coatings, monitoring, and compliance using corrosion control methods in a cost effective manner. Concentrated experience with internal corrosion monitoring and corrosion control monitoring, material selection, cathodic protection, coatings, chemical injection, sand control, pigging, SCADA, and integrity management. Worked in oil, gas fields including waterfloods, production, transportation, refining, storage, and petrochemical, in the areas of design, field consulting, installation, start-up and training.

Marine Structural Engineer with a bachelor's degree in chemical engineering and 24 years of design, analysis, and work coordination experience in the offshore and defense industries. Expert in offshore and ship design codes and structural analysis computer programs. Experienced in hull and topsides structures of spars, semis, FPSOs, and naval, drilling, and S-lay pipelay ships. Technically proficient in Sesam, SACS, ANSYS, MathCAD, and MS Project.

Facilities Engineer with a bachelor's degree in civil engineering and 30 years of oil and gas industry experience working for a major E&P company. Experienced in upstream oil and gas project engineering and management, FEED design, deepwater construction and installation, and startup and commissioning. Additionally experienced with downstream refinery expansions, gasification, permitting, and LNG plant operations. Geographic areas worked include Australia, Brazil, Kazakhstan, Peru, and Texas – Gulf of Mexico.

Project Engineer with a bachelor’s degree in mechanical engineering and 45 years of diversified power, oil and gas experience. Expert in mechanical and fired heat transfer engineering, front end engineering, project field services, and mechanical and process design services. Experienced in oil and gas processing for onshore and offshore topside platforms, refineries, petrochemical, chemical, power generation and cogeneration plants, LNG and cryogenic facilities, coal gasification pilot plants, and off-site utilities. Geographic areas worked include the US, Canada, Russia, Argentina, Kuwait, Saudi Arabia, and Iraq. Fluent in English and Arabic. Licensed Professional Engineer in the State of Texas.

Project Engineer with a bachelor’s degree in engineering technology and over 20 years of engineering and construction experience on upstream offshore production facilities. Work assignments have included project engineering on a client team, project engineering on a design team, and construction management for greenfield and brownfield projects. Work experience includes fixed and floating offshore installations. Roles and responsibilities have included engineering, project estimating, planning and controls, and project management under reimbursable and lump sum contracting agreements. Geographic work experience includes offshore Brazil, the Gulf of Mexico, and Nigeria.

Facilities Engineer with a degree in chemical engineering and 40 years of advanced production facilities engineering experience. Expert with process simulations, commercial aspects involving large scale LNG, gas gathering, compression and processing facilities, conceptual design, and detail engineering of onshore and ultra-deepwater offshore production facilities and pipelines. Experience with project upstream tie-ins, cryogenic plant and pipelines for LNG facilities, all aspects of project management and contracts. Geographic areas worked include the Gulf of Mexico, North Sea, Arctic, Brazil, Venezuela, Argentina, far east, Australia, and Saudi Arabia.

Process Engineer with a bachelor’s degree in mechanical engineering and 30 years of experience in unique rotational repair technologies for organizations from startups to Fortune 500 companies. Experienced in mechanical maintenance and repairs to high speed rotating equipment including steam and gas turbines, centrifugal and reciprocating compressors, blowers, fans, and other mechanical equipment.

Instrument Engineer with over 35 years of experience in upstream oil and gas, refining and chemical industries. Expert in control and safety systems, instrumentation and electrical systems. Experienced in production, subsea and drilling systems. Additionally experienced in conceptual design, FEED engineering, selection of engineering and fabrication contractor, detail engineering and design, fabrication, installation and commissioning. Geographic areas include Asia, Middle East, Africa and North and South America.

Applications Engineer with a bachelor’s degree in mechanical engineering and 32 years of experience in the upstream oil and gas industry. Expert in skid mounted package design, machine design and product development, prototype testing, evaluation and product improvement, and flow control systems. Experienced in reverse engineering to generate product design data for existing parts and assemblies, and performing stress analysis for the design of structural, rotating, and pressure vessels. Licensed Professional Engineer in the State of Texas.

Project Manager with a bachelor’s degree in mechanical engineering, a master’s degree in acoustical engineering, and 30 years of experience in diverse engineering projects. Experienced in machine design requiring multi-discipline integration and design coordination. This experience includes marine, pipeline, offshore, custom machine design, machine modification and reconstruction, and manufacturing tooling and fixtures. Also experienced in shop coordination and supervision of fabrication, assembly and start up. Technical skills include SolidWorks, COSMOS FEA, and AutoCAD.

Facilities Engineer with a degree in mechanical engineering and 40 years of experience specializing in major deepwater offshore oil and gas construction projects. Expert in mechanical and instrumentation engineering for offshore and onshore facilities, including pump and compressor stations. Experienced in subsea pipelines, topside facilities, and FPSO’s. Software proficiency in GoM computer MOS, AutoPipe, CAESAR II stress, and HYSIS. Certifications include registration as a professional engineer in the states of Texas, North Carolina, Wyoming and Hawaii. Geographic areas worked include Malaysia, Indonesia, Angola, Australia, Russia, Ecuador, Venezuela, and Brazil.

Project Manager with a master’s degree in mechanical engineering and 24 years of experience in major deepwater oil and gas projects for the oil and gas industry. Expert in FPSO proposal review, shuttle options including tankers and anti-two block systems, riser configuration, riser fluid transfer system and development, and hull form selection. Experienced in non-swivel option, metocean review, regulatory time line, and production facilities topsides. Also experienced in dynamic positioning stations, production facilities, mooring development, and subsea development. Skilled in project management, execution planning, decision analysis, and risk assessment. Licensed Professional Engineer in the State of Texas.

Marine Project Engineer with a bachelor's degree in mechanical engineer and 35 years of experience working for engineering and service companies in the oil and gas industry. Experienced in the management of modification and additions to jackup drilling rigs. Also experienced in the transportation and installation of jackup drilling rigs as well as in the conceptual and front end engineering for new builds and conversion of FPSOs and FSOs. Additionally experienced in preparing preliminary engineering development packages including cost estimates, bid proposals, decision and risk analyses, and technical specifications. Geographic areas worked include Australia, Azerbaijan, Singapore, Venezuela, and Texas.

Health and safety professional with a bachelor’s degree in business administration with 30 years of experience in the oil and gas industry working for service companies. Experienced in industry and governmental regulatory compliance, data gathering and analysis, program development and implementation. Additionally experienced in field inspection and auditing as well as contractor oversight and project coordination. Geographic areas worked include the North Slope. Certifications include certified safety professional (CSP).

Control Systems Engineer with a bachelor’s degree in electrical engineering and 32 years of global experience in the oil and gas industry. Experienced in developing and issuing specifications, data sheets, and requisitions for all types of field instrumentation including flow elements and valves. Additionally experienced in performing flow element and control valve sizing calculations, generating alarm summaries, reviewing quotations, and preparing bid summaries for gas metering skids, valves and similar equipment. Language fluency in Italian, Greek, Arabic, Dutch, and French.

Instrumentation and Control Systems Engineer with a master’s degree in chemical engineering, a bachelor’s degree in electronics, and 40 years of experience in instrumentation and control systems engineering for petro-chemical projects with major EPC contractors. Expert in project execution, P&IDs, HAZOP, control system architecture, safety systems, analyzer systems, and packaged equipment. Experienced in leaderships roles for instrumentation and control systems engineering projects of various types and sizes including refineries, LNG, LPG, gas plants, ethylene, and other petrochemical plants, pipeline, revamp, and modernization projects.

Professional Engineer with over 30 years of diverse domestic and international consulting experience in civil, structural, and ocean engineering. Has experience in all facets of projects development including business development, feasibility studies; preliminary and final design; permitting. installations, construction management, and project close out. Experienced in the design and construction of floating drilling rigs, fixed platforms, subsea pipelines, early production systems, FPSO, and terminals for the petroleum industry.

Marine and Mechanical Engineering Manager with a bachelor’s degree in mechanical engineering and 28 years of experience in the marine industry. Expert in ship and FPSO operations, commercial management, and project management with particular emphasis on crude tankers, offshore floating structures and equipment, FPSOs and FSOs. Additionally experienced in senior seagoing and classification surveying fields.

Project Cost Consultant with a master’s degree in industrial engineering and 39 years of experience in capital and project cost estimating for EPC projects in the upstream and downstream sectors of the oil and gas industry. Expert in overseeing and managing project controls, schedules, reviews, and publications, and providing supervision and training of junior project control staff.. Experienced in scoping and pricing project cost changes, trending cost data, developing and modifying cost control procedures and reference data as well as the preparation and management of estimates and proposals. Additionally experienced in upstream, midstream, and downstream equipment, and the preparation of estimates for large infrastructure complexes with associated off-site facilities such as LNG plants and receiving terminals. Software proficiency in C.O.S.T., ICARUS 2000, and KBASE/ICARUS

Project Controls Engineer with a bachelor’s degree in civil engineering and over 20 years of experience in cost controls, project management, project engineering, and construction inspection for industrial, commercial, utility, petroleum and environmental projects throughout Alaska. Experienced in government regulatory agencies' data deliverables and reporting requirements, project management of remote construction projects, public utility upgrades, and inspection for rural communities. Expert in managing schedules, document control, and other related functions, ensuring timely submissions of monthly progress reports, maintaining monthly landmark schedules and narrative submissions, weekly progress reports, time impact analyses, change order management, manpower loading, project estimating, contract administration, project inspections, tracking punch list items, documentation for any potential claims, and closing out projects. Proficient in Oracle, Citrix, and Primavera P3e.

Project Manager with a bachelor’s degree in engineering and over 20 years of experience in the oil and gas and offshore platform industry. Expert in engineering, construction, project management, contract administration, planning, scheduling, cost and material controls, and system development and implementation. Experienced in project control services and management systems in the engineering and construction of commercial buildings. Knowledgeable in offshore and onshore petrochemical, secondary gas recovery, LNG, and environmental projects. Additionally experienced in the co-generation and telecommunications industries with expertise in project controls, site administration, and document management. Proficient in Primavera, Open Plan, and MS Project. Language fluency inGerman, and Dutch.

Project Manager with a master’s degree in civil engineering and 38 years of experience in the oil and gas industry. Expert in deep and shallow water drilling and production facilities including piled jackets, TLP, SPAR, FSO and FPSO pre-FEED and FEED engineering, construction management, ocean tow, installation, and commissioning. Experienced in tanker modifications and conversions, crude oil and gas pipelines, LNG, GTL, and power generation. Also experienced in managing feasibility and conceptual studies, FEED, EPC, EPCI and PMC execution scopes, cost estimating, commissioning, and contract negotiations. Geographic areas worked include the US, Mexico, Brazil, Bolivia, Switzerland, Nigeria, Russia, Qatar, and Malaysia. Certifications include Level I Welding Inspector and Quality Auditor for ISO-9000 and 10000 Standards. Language proficiency in Italian, Spanish, Portuguese, German, and French.

Project Manager with a bachelor’s degree in mechanical engineering and 45 years of experience in the oil and gas industry. Expert in design engineering, plant engineering, estimating, cost and scheduling, procurement, contract administration, inspection, construction management, and maintenance. Expert in pre-FEED and FEED projects for FPSOs, offshore platforms, and petroleum, petrochemical, and chemical plants, Licensed Professional Engineer.

Mechanical Engineer with a PhD in gas turbine technology, a master’s degree in mechanical engineering, and 46 years of experience in all phases of offshore and onshore oil and gas production facilities. Expert in underground storage facilities, petrochemical plants, refineries, and pipeline systems. Experienced in project management of all phases and configurations of drilling rigs including ship-shape, jack-ups, and semi-submersibles in conventional and deep waters. Additionally experienced in DCS and supervisory control and data acquisition systems design, fabrication, offshore installation, hook-up, testing, and commissioning. Language fluency in English, German, French, Italian, and Arabic.

Project Manager with a bachelor’s degree in mechanical engineering and 44 years of global experience in engineering and construction. Expert in offshore and onshore oil and gas facilities, refineries, chemical plants, platform modification, and onshore pipelines. Experienced in managing engineers and related tasks, procurement personnel, and negotiations with sub-contractors as well as interfacing with clients, government entities and working in conjunction with other design firms. Geographic areas worked include the US, the United Kingdom, Venezuela, Mexico, Kazakhstan, Russia, Azerbaijan, and Kuwait. Language proficiency in Spanish and Russian.

Project Manager with a combined bachelor’s degree in civil and structural engineering and 30 years of experience in the upstream oil and gas industry. Expert in project management, engineering, development, and design of offshore production and drilling platforms (steel and concrete) for spars, TLPs, semi-submersibles, gravity-based structures, and jack-up rigs. Experienced in floater motion and hydrodynamic performance, analysis and design of hull structures, topsides structures, deepwater moorings, top tension risers and steel catenary risers. Additionally experienced in providing multi-discipline technical reviews on behalf of owners, the planning and execution of high risk marine operations, and conducting audits, technical due diligence and risk assessments on behalf of investors. Geographic work areas include the U.S. and international deepwater and cold region fields. Language fluency in English and French.

Project Manager with a bachelor’s degree in mechanical engineering, a master’s degree in business administration, and 33 years of experience in the oil and gas industry. Expert in managing offshore and onshore projects, and evaluating production and processing technology for marginal fields. Experienced in performing design studies of FPSO topside production equipment and the fabrication methods of modular designed systems. Geographic areas worked include the US and Brazil. Licensed professional engineer in the states of Mississippi, Maine, and Texas.

Project Manager with a bachelor's degree in mechanical engineering and 40 years of experience with engineering and construction companies. Expert in project management from pre-FEED through commissioning of offshore and onshore facilities. Experienced in gas facilities, deepwater FPSOs, oil field pipelines, tankage and production facilities, and plant modifications, expansions, and reconstruction. Geographic areas worked include the Gulf of Mexico, Alaska, California, Nigeria, Kuwait, Kazakhstan, Thailand, Malaysia, and Iran. Software proficiency in Microsoft Project.

Procurement Professional with a master’s degree in business administration and over 25 years of experience in developing strong business relationships and superior bottom line achievements based on sound analytical and negotiation skills, strategic planning, and astute decisions. Experienced in achieving significant cost savings and reductions through innovative procurement techniques that include global alliances, leveraged spending, and state-of-art procurement processes such as e-Procurement. Also experienced in leading procurement and contracting efforts for major platform build-outs offshore.

Procurement and Contracts Administrator with a master’s degree in electrical engineering and 40 years of experience . Expert in sourcing and management of the procurement activity associated with various projects in the subsea drilling, production systems, and deepwater drilling systems. Experienced in international procurement and sourcing for capital equipment, materials, and services related to the oil, gas, and petrochemical industries. Technically proficient in the design and implementation of mainframe-based (IDMS) proprietary procurement and logistics system, and SAP. Lanuguage fluency in English, Spanish, and German.

Materials manager and logistician with a bachelor's Degree and 35 years of international and domestic experience, mostly with a major oil company. Experienced in materials accounting, financial tracking and reporting, bid package creation procedures, surplus equipment utilization, contractor quality control, interpretation of contracts, local area procurement procedures, office administration, aircraft administration (helicopter and fixed-wing), and training of local nationals. Familiar with international transportation terms and contracts dealing with air, land, and ocean freight. Knowledgeable of the equipment and parts related to the drilling, production, and oilfield construction industries. Geographic experience includes Egypt, Iran, Indonesia, Bahrain, Kuwait, Abu Dhabi, the Russian Arctic, and Bolivia. Computer skills include Microsoft Office, CorelDraw, Visio, and Lotus 1-2-3. Skilled at various computerized parts inventory and maintenance systems and their interfaces. Fluent in Spanish and English and conversational in Farsi and Arabic.

Project Procurement Manager with a bachelor's degree in business administration and 30 years of experience with major exploration and production and service companies in the oil and gas industry. Experienced in purchasing, budget control, contract management and administration, materials management, SAP implementation, systems auditing, logistics, fleet maintenance operations, and marketing. Geographic areas of work include Sakhalin Island, Russia and Uzbekistan. Proficient in the Russian language.

Purchasing Manager with a master’s degree in industrial management and 25 years of experience in procurement operations. Expert in purchasing raw materials, components, capital equipment, and maintenance, repair and operations commodities. Also experienced in cost reduction, negotiation, global sourcing, supply base management, contract administration, personnel development, strategic planning and sourcing, quality improvement and project management. Certifications include: CPM and CISCM. Technical proficiencies include: MAPICS, Qad-Mfg-Pro, JD Edwards, PeopleSoft, and Baan.

Purchasing Manager with a bachelor’s degree in industrial engineering, a master’s degree in business administration, and extensive domestic and international experience in both the upstream and downstream sectors of the oil and gas industry. Expert in materials management, logistics, cost controls, operations management, procurement, negotiations, arbitrations, and mediations. CPM certified as well as technical mastery in the use of Oracle, JDE, SAP, M/S Scheduling, MS Project, and Offshore Manager.

Instrument engineer with a bachelor’s degree in electrical engineering and 46 years of experience working for major companies involved with petrochemical plants, oil refineries, pulp, paper, and power generation plants. Expert in the management of construction, commissioning and startup for refinery expansion, fire rebuilding, coal, gas turbine, and wind power plants worldwide. Experienced in distributed control system (DCS) including, Foxboro Invensys, Honeywell, YEW, Siemens, Bailey, Micon, and, AB programmable logic controller (PLC). Implemented and managed 6 Sigma, failure mode and effects analysis (FMEA) and Red Flag reviews.

Piping Designer with over 20 years of project experience in the oil and gas industry. Areas of expertise include design and layout of high-pressure wellhead systems, manifolds, flow-lines, line heaters, risers, oil treating, gas dehydration, two and three stage gas compressors and compressor stations, vapor recovery units, oil and gas metering, incoming and departing oil and gas pipelines, pipeline pumps, water cleaning, relief systems, storage, disposal, utility, sewage systems, and firewater systems. Associated experience includes preparation of SFD’s, PFD’s, P&ID’s, equipment arrangements, plot plans, ASME coded vessel design, skid packages including large production modules, LCP’s, LSO’s with a complete composite materials list. Experienced with offshore platforms, onshore oil and gas facilities, refineries, petrochemical plants, semi-submersible drill ships, and onshore and offshore drilling rigs. Software experience includes AutoCAD 2002, PowerCAD, FILEFINDER, basic Rebis, and ProPipe.

Designer with 20 years of experience in CAD design and computer graphics design of equipment racks for voice and data networks. Experienced with fabrication inspection of risers, Division 17 standards, creation of floor-plan drawings of projects, production of record drawings, creation of layout proposal drawings, designing BOP Panels for offshore oilrigs, and factory acceptance testing at clients’ locations. Additional IT experience includes setting up Ethernet networks for systems on Windows NT, technical training, and writing of user manuals for components. Experienced user of AutoCAD and Visio.

Piping Designer with 35 years of experience in piping design and layout. Areas of expertise include piping activities for the chemical, petrochemical, refining, and specialty plastics industries. Project experience include front-end load, estimates, man-hours, plot development, layout design, checking of various units within each project, resolving technical problems related to piping layout or routings, resolving problems pertaining to RTR pipe, prefab skids, piping procedures, and material conveying, and participating in the design and layout of process plants to optimize operations, maintenance, safety, quality, constructability, and economics. Additionally experienced working with plant engineers on domestic and international assignments in China, Russia, and Samoa.

Production Operations Manager with a bachelor's degree in engineering and 39 years of oil and gas industry experience working for small and large independent E&P companies. Experienced in production operations, risk management, budgeting, staffing, drilling, construction, regulatory, health and safety, and environmental compliance. Geographic areas worked include Texas, the Texas Gulf coast, Louisiana, New Mexico, Ohio, Pennsylvania, and the Gulf of Mexico.

Director with a bachelor's degree in petroleum engineering, and 32 years of experience in the oil and gas industry. Expert in operations (onshore and offshore), reservoir (project economics, field studies, reserve estimation, lease sales), production, completion projects, strategic planning (scenario planning, portfolio optimization, capital allocation), organization design, and corporate investor relations. Geographic areas worked include the Gulf of Mexico, Permian basin, and California.

Reservoir Engineer with a bachelor's degree in petroleum engineering and 46 years of experience working for small E&P companies. Skills include recompletions, drilling, reserves evaluations, economics, and operations management. Geographic area expertise is west Texas. Registered professional engineer in the state of Texas.

Geologist with a Master's degree and 25 years of experience working for major oil and gas companies. Expert in optimizing field depletion and exploitation through the integration of 3-D seismic with well, sequence stratigraphic, and production data. Experienced in interpreting fluvial, deltaic, and deepwater sands data, reservoir mapping, interpreting structural and stratigraphic data, and data integration and management. Geographic areas worked include offshore Louisiana and the Gulf of Mexico. Computer proficiency in Geoquest IESX, SeisWorks, SynTool, TDQ, 3DVI, ZMAP, PostStack/PAL/RAVE, OpenWorks, and StratWorks; SMT, and GOMAP.

Certified Petroleum Geologist with a master's degree in geology and over 20 years of diversified experience with a major oil company, independents, and as a consultant. Experienced in regional geology and field studies, prospect generation and evaluation, and seismic and well log interpretation. Effective in project management and working in multidisciplinary project teams. Extensive technical writing, oral presentation, and sales experience. Geographic areas worked include offshore Gulf of Mexico, onshore south Louisiana and Texas, and northern Alaska. Some experience on PC workstations using Kingdom software.

Exploration geologist with a Doctorate and more than 30 years of experience generating prospects as an independent operator in central and northern Louisiana and Oklahoma. Managed an exploratory program on the North Slope of Alaska, including managing the work of seven geologists. Experience includes operation of mineral leases, and technical and fiscal responsibility for drilling, evaluating, completing, and producing wells. Geographic areas worked include north and central Louisiana, north Africa, Alaska, and Oklahoma.

Certified Petroleum Geologist and Geological Engineer with a bachelor's degree in geological science and 21 years of experience working for both major and independent oil and gas companies, service companies, and as an independent contractor. Expert in interpreting 3D seismic data, providing geological, geophysical, and engineering analysis for legal support, and generating prospects in offshore Texas and Louisiana. Additionally experienced in exploration geology, reservoir evaluation, analysis of core samples, fluids, and soils, and field development. Software proficiency in GeoQuest, Kingdom, PI/Dwights, ArcVIEW, Freelance Graphics, Lexco, and Amipro. Geographic areas worked include Gulf of Mexico, offshore Louisiana, Bolivia, and offshore Texas. Fluent in Spanish.

Geologist with a Master's Degree and more than 20 years of experience working for a major company. Experienced in prospect development, exploration, and sales; marketing, and correlation and mapping, fault planning, and integrating production and reservoir data. Geologic areas worked include south Louisiana. Computer skills include Lotus 1-2-3 and WordPerfect and some knowledge of Microsoft Word and Landmark.

Geoscientist with a Master’s Degree and 40-plus years of experience with major and independent oil companies throughout the world. Advisor on exploration and development in Argentina, Mexico, and Venezuela, including enhanced oil recovery and horizontal drilling studies, imagery analysis, new venture evaluation, technology introduction, field studies, and rift and fracture analysis. Geographic areas worked include Texas, Louisiana, Oklahoma, New Mexico, Mississippi, Mexico, Venezuela, Argentina, Africa, Europe, the Middle East, Asia, and Australia. Proficient in Landmark, GeoQuest, and Windows 95. Knowledge of Spanish, French, and German.

Development Geologist with a Ph.D in geology and 40 years of upstream oil and gas experience working for small and mid-sized independents. Experienced in exploration, prospect generation, evaluating regional offshore 2-D seismic data, mapping, and field studies. Geographic areas worked include south Louisiana and the Gulf of Mexico shelf. Computer skills include Landmark and SMT. Texas licensed geologist and member of AAPG, Houston Geological Society, and Lafayette Geological Society.

Geoscientist with a bachelor’s degree and 30 years of experience working for midsize and independent oil and gas companies, and service companies. Expert in the full integration of 3-D and 2-D seismic with subsurface log and production data to create ranked inventories of ready-to-drill prospects. Experienced in prospect and acreage evaluation, AVO amplitude and attribute analysis, seismic data processing, and 3-D and 2-D field acquisition, 3-D visualization, and reservoir characterization. Geographic areas worked include Louisiana, Texas, Permian Basin, and the Gulf of Mexico’s shelf and deepwater. International geographic areas worked include onshore Romania and Kazakhstan, and offshore India, Java, Nigeria, Kenya, Tanzania, and Trinidad. Software proficiency includes Landmark, Hampson-Russell, GeoQuest, IESX, GeoFrame, Petrel, and SMT. Licensed petroleum geologist and petroleum geophysicist.

Geologist with a Master's Degree and over 30 years of experience in exploration and remote sensing with several major and independent oil companies and as a consultant. Highly skilled at merging multiple types of data to generate prospects, including satellite imagery and aerial photography. Experienced in domestic economic evaluation, mud logging and analysis, and isopaching. Geographic areas worked include the Texas Gulf coast, east Texas, Australia, India, Europe, and Africa. Proficient in Microsoft Office, CorelDraw, UNIX, Canvas, and image processing/remote sensing software.

Geologist with a PhD in geology and more than 30 years of experience working as an independent consultant, small independents, and in academia. Experienced in play analysis, stratigraphic traps, clastic and carbonate facies, sequence and seismic stratigraphy, basis analysts, reservoir characterization, and regional studies. Geographic basins worked include Illinois, Appalachian, Arkoma, and the Ouachita Mountain thrust and fold belt. Software proficiency include SMT.

Geologist with a Masters’ degree in Geology and over 30 years of experience working for large companies and independently. Expert in integrating seismic engineering and petrophysical data into geologic models. Experienced in reservoir simulation and field development, planning horizontal/directional wells, and seismic attributes interpretation. Software proficiency in Petrel, Landmark, StratWorks, Z- Map, SeisWork 3D, and Open Vision. Geographic areas worked include Peru, Venezuela, Columbia, Kazhakastan, and the Gulf of Mexico.

Geologist with a bachelor's degree in geology and 30 years of experience working for large independent oil and gas companies and a major oilfield service company. Expert in the geology of the U.S. Gulf coast and the analysis of producing trends for lease sales, acquisitions, exploration and development and regional analysis. Additionally experienced in technical and managerial levels of exploration and production, development geology, geophysics, well log analysis, and 2-D and 3-D seismic interpretation of both clastic and carbonate environments. Geographic areas worked include the onshore and offshore Gulf of Mexico, east Texas, Louisiana, Michigan, and the Appalachian Basin. Software proficiency in GeoGraphix, GeoFrame, SMT, and Landmark. Fluent in German.

Geoscientist with MS Geology and over 30 years of experience working for both major and midsized companies in the US and internationally. Expert in reservoir modeling and geosteering horizontal wells in clastic and carbonate reservoirs. Additionally experienced in exploration, production, and operations, particularly directing, planning and designing horizontal, horizontal multi-lateral, and ultra short radius horizontal wells to fit reservoir and production models. Geographical areas worked include west Texas, mid-continent Gulf of Mexico, SE Asia, and North Sea. Software proficiency in Petrel, Z-MAP, and CPS3.

Geologist with a doctorate in geology and more than 30 years of oil and gas industry experience working for a service company, an E&P company, and a research company. Experienced in exploration, exploitation, prospect generation, risk assessment, pore fracture pressure prediction, seal analysis, reservoir characterization, prospect appraisal, seismic mapping, seismic interpretation, and basin modeling in deepwater and salt basins and deep shelf. Geographic areas worked include the Gulf of Mexico, Texas and Louisiana Gulf Coast region, Australia, China, Egypt, Africa, Libya, Brazil, and the North Sea. Computer skills include OFM, PA, and Landmark geological and geophysical workstations.

Geologist with a Ph.D. in Geology and 20 years of experience of which 12 are in exploration and production. Has broad experience that includes seismic sequence stratigraphy, carbonate sedimentology, block evaluation, risk assessment, reservoir characterization and hydrogeology. Workstation skills include SMT, Landmark GeoQuest, Openworks, and Zmap. International experience and domestic experience spans across the Gulf Coast, Gulf of Mexico, Mid-Continent, Rockies, and the Appalachians.

Geologist with master's degree in geology and 30 years of industry experience with major oil companies and as a consultant. Experienced in prospect generation, exploration, field studies, development, and operations. Cross trained in petrophysics, geophysics, seismic stratigraphy, geochemistry, and reservoir engineering. Geographical areas worked are south Texas, east Texas, Gulf of Mexico shelf and deepwater. Software proficiency in Landmark, SMT, and GeoQuest.

Geologist/Geophysicist with an MBA, a bachelor’s degree in Physics and over 20 years of experience working for mid-sized independent operators as an employee and consultant. Experienced in exploration, exploitation, acquisitions, divestitures, and operations including new field discoveries and field extensions in conventional and unconventional plays. Geographic areas worked include California, the Gulf coast, and offshore Gulf of Mexico. Software proficiency in Petra, GeoGraphix, SMT, Landmark Suite, and GOCAD.

Geologist with a bachelor's degree in geology and a master's degree in accounting and finance with over 30 years of experience in the oil industry working for mid-sized to major E&P companies, a large service company, and as a consultant. Experienced in screening prospects, generating drillable locations and recompletion zones, evaluating producing properties, calculating reserve risks, well site evaluation using MWD and 3-D seismic, well planning, well log analysis and reservoir characterization studies. Additionally experienced in regional trend mapping studies that resulted in new oil and gas plays. Geographic areas include the Texas and Louisiana Gulf of Mexico offshore and onshore, Permian Basin, and Anadarko basin. International experience includes Mexico, Venezuela, Ecuador, Trinidad & Tobago and Peru, in both clastic and carbonate depositional trends. Software proficiency in Tigress, Stratamodel and StratWorks, SMT, RMS, Tempest, FracPerm and Petra. Language proficiency in Spanish.

Geologist with a master’s degree in geology and more than 30 years of experience in exploration and development at a major oil company, a service company, and consulting. Experienced in deltaic and deepwater clastics, carbonates, and in thrust-belt settings. Skilled in prospect evaluation and additionally experienced in operations with more than 25,000 hours at the wellsite. Well versed in integrated reservoir and enhanced oil recovery studies and reserves calculations and proficient in the use of PETRA, Petrel, Landmark StratWorks, and GeoGraphix.

Geologist and Geophysicist with a master’s degree in Geology and a 30-year highly successful record of exploration and development in most U.S. and numerous international petroleum provinces. Extensively experienced in well log analysis, waterfloods, structural and stratigraphic seismic interpretation, sequence stratigraphy, sandstone and carbonate reservoirs, planning, development, reservoir engineering, project management and coaching, mentoring, and staff supervision. Computer competencies include Landmark Seisworks, GeoQuest, ZMAP, and Post Stack/PAL. Diversely experienced with geographic history covering 6 continents. Domestic experience includes south Texas, California, Nevada, and Michigan with basin analysis experience in the Wilcox, Lobo, Williston, Austin Chalk, Arkoma, Big Horn, Powder River, Anadarko, Michigan, Black Warrior, Austral, Burgos, and Gulf Coast. International practiced in Mexico, Argentina, western Siberia, C.I.S., Uganda, the North Sea, Oman, and Australia. Languages include English and basic Russian and Spanish. Registered Geologist in Arkansas and licensed Texas Geoscientist. Seeking Houston based contract position.

Exploration and development geologist. Successful independent prospector. Proven expert in onshore Gulf of Mexico (Texas and Louisiana), also worked Louisiana State Waters, parts of South America and the former Soviet Union. Focused in prospecting mature areas (mainly salt domes) where remaining opportunities require detailed, integrated work, specializing in the Miocene, Frio and Wilcox Formations. Trained in Landmark-Geographix and SMT workstation software. Able to work independently or as part of a team.

Geologist with master’s degree in geological sciences and 30 years of experience working for small and mid-sized E&P companies. Expert prospect generator. Experienced in regional geologic studies, seismic interpretations, subsurface mapping, electric log analysis, log correlations, structural geology, mapping complexly faulted areas, deal screening, depositional environment interpretations, reserve estimation, and basic drilling and logging operations. Geographic areas worked include Texas and Louisiana Gulf coast, Gulf of Mexico, Permian Basin, and Appalachian basin. Software proficiency in SMT.

Geoscientist with a bachelor’s degree in geology and 30 years of experience working for small independents and consulting firms. Expert in seismic interpretation and prospect generation. Additionally experienced in AVO analysis, spectral decomposition analysis, stratigraphy, mapping, logging, clastics, carbonates, salt domes, acquisition evaluations, and environmental studies. Geographic areas worked include onshore and offshore Texas, Louisiana, Mississippi, Alabama and extensive experience in the Eagle Ford Shale. Software proficiency in SMT, PETRA, GeoGraphix Discovery, Landmark SeisWorks, Hampson-Russell AVO, and Strata.

Geologist with a MS and 23 years of extensive experience analyzing clastic rocks for reservoir characterization, including facies, core description, sequence stratigraphy, and borehole images. Ability to work as part of exploration and exploitation teams providing real-time analysis and integration of geologic, petrophysical, and seismic data. Extensive wellsite experience with logging and coring. Experienced with training and mentoring. Proven record of accomplishment building productive working relationships with service providers. Areas of expertise and skills include: deepwater, fluvial, deltaic and estuarine, geological-petrophysical integration, borehole images/dipmeters.

Geologist and Geophysicist with a Ph.D and 25 years of experience in Permian Basin exploration, research, production, and stratigraphic analysis. Experienced with salt domes, 2-D and 3-D seismic interpretation, heavy oil, and quality control of prospects. Geographic areas worked include the Gulf of Mexico shelf, onshore U.S, the Gulf coast, Texas, the Rockies, California, Louisiana, Mexico, South America, Argentina, and Colombia. Software proficiency in Landmark, GeoGraphix, PETRA, and Petrel. Language proficiency in Spanish.

Geoscientist with a bachelor's degree and 28 years of domestic and international exploration and development experience with independent oil and gas companies. Experienced in development evaluations, acquisition analysis, and prospect development and screening. Proficient in open-hole, cased-hole log and core analysis. Skilled in all aspects of production operations, land, JOA, contracts, accounting, and production settlement methods for producing properties. Geographic areas worked include Wyoming, Colorado, Utah, Kansas North Dakota, Oklahoma, Texas, and overseas areas. Computer skills include GeoFrame, Landmark, Geographix, and many other geological, engineering, and geophysical programs. Skilled in geophysical interpretation.

Geologist with a bachelor’s degree in geology with a minor in petroleum engineering and more than 30 years of upstream oil and gas experience in exploration and exploitation in multiple geological trends. Experienced in prospect generation, mapping, acquisition and evaluation, development drilling and completions, workover recommendations, open and cased-hold log analysis, and 3-D seismic survey interpretation, salt domes, and gas shales. Software proficiencies in SMT, KINGDOM 2D/3D PAK, EarthPAK, and Prizm. Geographic areas of expertise include Texas and Louisiana gulf coast, south Texas, east Texas, offshore Gulf of Mexico, north Texas, and the mid-continent area. Certified Petroleum Geologist.

Geoscientist with a Ph.D in Geology and over 30 years of experience working for major oil and gas companies and as an independent consultant. Expert in sequence stratigraphy in carbonate and non-marine through deep- marine/lacustrine clastic settings. Additional experience includes acquisition evaluations, basin studies, reservoir characterization, and structural development using 2D and 3D- seismic tools. Geographical areas worked include a broad area of onshore and offshore US and international basins. Software proficiency includes Landmark OpenWorks, StratWorks, SMT, GeoQuest, and SDI Montage.

Geologist with a PhD in geology and over 35 years experience in applying clastic sedimentation and geomorphology to oil production and exploration problems, including exploration for prospects, field mapping, and construction of reservoir models. Also experienced in description and interpretation of approximately 12,000 feet of clastic core and supervising description of another 6,000 feet of core, representing all of the major clastic depositional environments from the Gulf Coast, Mid-Continent, Wyoming, southeastern New Mexico, New Guinea, Saudi Arabia, North Sea, Eastern Venezuela, Lake Maracaibo of Venezuela, and offshore West Africa. Skilled at statistical analysis of geological data and integration of biostratigraphic data. Software includes Microsoft Office, Landmark StratWorks, GeoGraphix Discovery and GES97, and Rockware LogPlot.

Licensed professional geologist with a master’s degree and an extensive, successful history of revenue enhancement via proven reserves and cash flow. Expertise in seismic, stratigraphy, acquisitions, negotiations and depositional analysis. Technical acumen includes GeoGraphix, PETRA, GeoQuest, ElanPlus, UNIX and Landmark. Geographic experience in Utah, Colorado, Nevada, New Mexico, North Dakota and Wyoming including the Powder River, Green River, Raton, Dakota, Uinta and San Juan basins, as well as, international exposure in Indonesia. Published contributor for geological journals.

Geoscientist with a total of 22 years of experience, 11 in oil and gas exploration and exploitation, and 11 as an environmental/regulatory geologist and hold a BS Geology and Environmental Studies . Extensive experience working on multidisciplinary teams on reservoir characterization, development geology, and field studies. Proficient with reservoir modeling, computer mapping, well logs, and petrotechnical data management. Developed risk management strategies for acquisitions and divestitures and litigation support. Managed regulatory activities for over 130 hydrocarbon-impacted sites in west Texas. Led multidisciplinary teams to conduct site investigations, assess risks, and perform remediation feasibility testing. Negotiated with regulators regarding appropriate investigation and corrective action plans for site remediation and closure. Geographic areas worked include offshore China, Brazil, Equatorial Guinea, Nigeria, Cook Inlet and the North Slope of Alaska. Proficient in Petrel, CPS-3, GeoFrame, Petra, Power Log and Microsoft Office programs.

Master's prepared Geologist with 20+ years proven track record oil and gas prospecting experience seeking contract placement. Specialist in Exploration, Prospect Generation, Carbonates, Horizontal Plays, Gas Shale Plays, Sand Plays, Tight Gas , Water Flood, acquisitions and due diligence. Experienced with Acquisition Evaluations working in Data Rooms. Computer skills include Excel, Word, Access, Power Point, Landmark, GeoFrame and GeoQuest (Finder, Stratlog and Charisma), Dwights Powertools, OGRE Economics, Geographix Mapping and Cross Section and Petra. Diverse domestic experience in Appalachia, Rockies, with focused areas of interest in Oklahoma, Permian Basin, Gulf of Mexico, and South and East Texas. Bilingual: English/Spanish. This candidate is a certified geologist, registered professional geoscientist and accomplished author/speaker for industry related events and publications.

Wellsite geologist with more than 25 years of work experience. Experienced in analyzing, describing, and evaluating drilled cuttings, MWD, and wireline data. Also experienced in advising and liaising with onsite personnel, company men, and operations geologists. Comfortable supervising geological teams including QA/QC of Geological Contractors. Also experienced identifying formation boundaries and changes and selecting casing and coring points.

Geologist with a PhD and 30 years of experience. Worked exploration, development, and operations. Has new venture exploration and reservoir characterization experience. Experience primarily clastics, and the structures were complex, some fluvial basins, some overthrust. In the deepwater, has worked very porous Miocene sands associated with growth faults. Onshore, worked deeper rock that were dirtier and also some tight sands.

Geologist with 30 years of experience and holds a PhD in geology. Experienced in exploration, development, structural geology, outcrop studies, rock mechanics, computer and physical modeling, restoration and balancing techniques, and regional tectonics. Geographic experience includes Arkoma, Anadarko, Wyoming Thrust Belt, and the Gulf of Mexico shelf. International experience includes offshore Trinidad, offshore Brazil, eastern Russia, western Canada, Turkey, and China. Geographic software includes numerous mapping and interpretation packages.

Geologist with hands-on industry experience in various hydrocarbon provinces, clastics and carbonates, and coal bed methane. Experienced in correlating well logs, constructing relevant structural and isopach maps and geologic cross-sections to illustrate key concepts. Also experienced recommending drilling locations using available geologic data. Provides support for well completions, well recompletions, workovers, and well planning as well as for reserve analysis.

Exploration and Development Geologist with a master's degree in economic geology and 30 years of experience working for large and mid-sized E&P companies. Expert in 3D prospect generation utilizing AVO and attribute analysis. Additionally experienced in operations planning, wellsite operations, and field studies. Geographic areas worked include the Barnett, Frio, Wilcox, Hackberry, and Vicksburg, and offshore Texas and Louisiana. Software proficiency in GeoQuest, Landmark, and SMT.

Geologist with over 20 years of experience in exploration and exploitation with a proven track record of success with a major oil company, small independents, and as a consultant. Effective with multi-task, multi-priority work assignments in both individual and team environments including organizing and implementing activities to obtain desired results. Experienced generating prospects and evaluating properties for acquisition or sale offshore and onshore Louisiana integrating geologic and seismic data. Also experienced in planning 3-D seismic shooting and drilling programs in mature areas to target bypassed reserves. Geographic areas worked include south Louisiana, Arkansas, the OCS, the Texas Gulf coast, and the Rocky Mountains. Computer proficiency in SMT Kingdom and Landmark as well as other business and technical software.

Geologic consultant with 25 years experience, a master’s in Geology and experience in geology, exploration, negotiations, field geology, new ventures, acquisitions, and supervision. Excellent communication skills, was very professional, and had a great attitude. Geographic areas of experience include South Texas and some Permian basin. Language skills include some Arabic, French, and Dutch. International experience in Asia, Africa, Middle East, and Canada. Workstation skills consist of Geographix, Petra, Excel, Access, and Microsoft Suite.

Geologist with a Master's degree and more than 20 years of experience working for independent companies. Experienced in prospect generation, development, exploration, sales and marketing, correlation and mapping, fault planning, and integrating production and reservoir data. Geologic areas worked include Gulf of Mexico-shelf, east and west Texas and south Louisiana. Extensive management experience. Computer skills include Landmark, Explorer, PRIZM, SMT, Stratworks, and Seisvision. Specialized in 3D software interpretation and integration.

Geologist with a PhD and 20 years of upstream experience with major oil companies. Experienced in exploration, prospect generation, acquisition and well recommendations, salt tectonics, clastic and carbonate plays, and lease evaluation. Additionally skilled in verbal and written presentations. Geographic areas worked include the Gulf of Mexico, the Texas and Louisiana Gulf Coast, all Atlantic regions. and the Red Sea Concession area on the Saudi Arabian Coastal Plain. Computer skills include Landmark SeisWorks.

Master's prepared Operations Geologist with over 30 years experience with major and independent companies. Strengths include operations reporting, exploration, log correlation, sedimentology, map translation and supervision of geological personnel. Computer experience using mudlogging software. Geographic work history is the West Texas Permian Basin and, internationally, in Columbia, Brazil and Venezuela. US and Colombian Citizenships. Bilingual: English/Spanish. Professional candidate with articulate verbal and written communication skills.

Sr. Geologist with a master’s in geology and over 30 years experience in exploration, development, management, professional and technical staffing, conceptual design, information interpretation, and contract negotiations. Experienced in mapping, cross sections, regional studies, and data management. Geographic areas of expertise is in numerous Rocky Mountain basins. Geoscience computer skills are in Petra.

Geologist and Operations Manager with a master’s degree in geology and more than 30 years of extensive experience in upstream independent oil and gas companies. Experienced in field development and exploitation with skills in cross-functional team leadership, resource management, project planning, technical analysis, documentation and reporting, and a well-respected advisor on geologic modeling and 3D seismic. Additional skills include business and economic analysis leadership; risk analysis and risk management; JV development, drilling and operations management; and prospect evaluation. Geographic areas worked include north and south Louisiana, Texas, Oklahoma, Arkansas, Mississippi, New Mexico, the Gulf of Mexico, and Canadian foothills. Software proficiency in SMT Kingdom and proprietary applications.

Geologist with a master’s degree in geology and more than 25 years of industry experience working for midsize oil and gas companies. Experienced in the development and operations that include planning, landing and geo-steering horizontal wells targeting high production of liquids in complex lithologies and shale. Additionally experienced in using integrated geosciences and rock skills to create, plan, and execute horizontal drilling programs, and to lower risk for prospects in areas of stratigraphic complexity. Geographic areas worked include Colorado, Louisiana, Texas, and Gulf coast. Software proficiency includes IHS, Petra, Aries, Bengal (AFE), GeoGraphix, Petrel, Landmark, and SMT.

Geologist with a MBA and over 11 years of experience working for large and small oil and gas companies. Experienced in prospect generation, evaluation, risk, marketing, field development, development planning, property evaluation, acquisition closing and technical and project review. Experienced in both conventional and unconventional plays. Geographic areas of experience include deepwater Gulf of Mexico, south, east, and west Texas, the Louisiana and Texas Gulf coast, the Rockies, the midcontinent region, and The Netherlands. Software proficiencies include Petra and Petra Seis, GeoGraphix, Petrel, SMT, Landmark, Jason’s Inversion, Stratimagic, ARIES, DrillingInfo, Peep, Business Objects, and Spotfire.

Geologist with a bachelor’s degree in marine geology and 30 years of experience working for midsize and independent oil and gas companies. Experienced in generating development and exploratory wells in the Gulf of Mexico. Additionally experienced in exploitation of producing properties, exploration for lease sale and farm-in opportunities, acquisitions, and monitoring daily drilling operations. Geographic areas worked include shelf and deepwater Gulf of Mexico. Software proficiency includes SMT and Landmark suite.

Geologist with a bachelor of science degree in geology and over 25 years of experience working in small oil and gas companies. Expert in workover recommendations on development wells. Additionally experienced in prospect generation, well monitoring, logging operations, seismic reprocessing, velocity modeling, subsalt and decollement studies, multi-layered mapping, and evaluating farm-out and acquisition opportunities. Geographic areas worked include the Gulf of Mexico, South America, and West Africa. Proficient in SMT, Landmark, and GeoGraphix. A Certified Petroleum Geologist and member of the New Orleans Geological Society, the Society of Professional Well Log Analysts, and the Southeastern Geophysical Society.

Geologist with a Ph.D. in sedimentology and more than 25 years of experience in international exploration, production, and development while working for a major E&P company. Expert in training technical professionals. Experienced in sequence and seismic stratigraphy, sedimentology, reservoir characterization, reservoir connectivity analysis, and unconventional resource stratigraphy. Geographic areas worked include U.S. Gulf Coast, the Midland and Arkoma Basins, the U.S. Atlantic Shelf, the Gulf of Mexico shelf and deepwater, the North Sea, Mid-Norway, Barents Sea, Papua New Guinea, Niger Delta, Sarawak (Malaysia), Mahakam Delta (Indonesia), Northwest Shelf (Australia), Pannonian Basin (Hungary), South Caspian Sea (Azerbaijan, Turkmenistan), China, Norwegian Sea, North Caspian Basin (Kazakhstan), Lower Saxony and Ruhr – Muensterland Basins, Germany (unconventional, CBM, shale gas, light tight oil).

Geologist with a bachelor's degree in geology and over 30 years of experience working for mid-sized drilling and production companies. Expert in interpretation of geological, geochemical, and geophysical data and conducting field studies. Experienced in the application of engineering science and technology and stratigraphic and structural mapping. Geographic areas worked include the midwest and southwest US, Europe, Asia, Africa, and the Middle East. Software proficiency in Petra, GeoGraphix, CAD, DrillingInfo, and IHS.

Petroleum Geophysicist with a Bachelor's Degree and 25 years of international and domestic geophysical and geological experience with major and foreign state oil companies and as a consultant. Special expertise in seismic interpretation and the integration of geological and geophysical data for exploration and reservoir characterization studies. Proficient in the use of geoscience computer systems, including mainframe and workstation-based 2-D and 3-D seismic data interpretation. Experienced in survey planning, acquisitions, processing quality control, and interpretation of onshore and offshore 2-D and 3-D seismic data. Capable of basin and trend analysis, structural and stratigraphic analysis, and economic and risk analysis. Substantial supervisory and managerial experience. Regions worked include onshore and offshore Gulf of Mexico, U.S. mid-continent, Appalachians, California, Arabian Gulf, west and north Africa, and Venezuela. Software proficiency in Petrel, ConSeis, Landmark Suite, and UNIX-based software. Fluent in Spanish.

Geoscientist with a Master's degree and 30 years of experience in the oil and gas industry working for a large independent and as a consultant. Experienced in prospect generation, prospect development, attribute analysis, seismic interpretation, and constructing cross sections. Geographic areas worked include the mid-continent area, south Texas, the Gulf coast, and offshore Gulf of Mexico. Computer skills include 2-D and 3-D workstation experience on Landmark systems.

Geoscientist with a bachelor's degree in geology and over 20 years of international and domestic exploration, exploitation, and development experience with a major oil company and independents. Experienced in prospect generation, seismic data mapping, risk analysis, well proposals, well planning, well report writing, and collaboration with exploration and development teams. Geographic areas include the Permian Basin, Texas, the Gulf coast, south Louisiana, and Paraguay. Software proficiency in Petra, SMT, GESX, and Eclipse.

Geoscientist with 22 years of international and domestic exploration and development experience with medium-to-large oil companies and geophysical contract companies. Credited with numerous discoveries in various parts of the world. Experienced in 2-D and 3-D seismic interpretation, seismic acquisition and analysis, data processing, and prospect screening and generation. Geographic areas worked include the onshore and offshore Gulf of Mexico, the United States west coast, the Rocky Mountain overthrust of Utah, Western Siberia, Kazakhstan, Uzbekistan, Azerbaijan, Brazil, Paraguay, Argentina, offshore Australia, Malaysia, Borneo/Sumatra, and the Gulf of Thailand. Proficient in MS Office, Landmark, and GeoQuest. Language skills include Russian, German, and French.

Geoscientist with a Bachelor's Degree and 30 years of international and domestic exploration and production experience with both major and large independent petroleum companies. Skilled in 2-D and 3-D interpretation and integrated subsurface mapping. Extensively experienced working with multidisciplinary teams on basin analysis, exploration evaluations, acquisition analysis, field development, and prospect generation and screening. Proficient in reflection and borehole seismic acquisition, processing quality control, and integrated seismic and open-hole log analysis. Geographic areas worked include Louisiana to western Florida, onshore and offshore Gulf coast, Mexico, Guatemala, Venezuela, Colombia, Ecuador, Peru, Bolivia, Paraguay, Argentina, Yemen, Pakistan, Gabon, Congo, U.K. North Sea, and eastern Russia. Proficient in Microsoft Office, Landmark, and Integral Plus. Effective communication skills in English and Spanish with basic skills in French.

Geologist/Geophysicist holding a MS in Geological Sciences and 25 years of experience in basin evaluation and prospect/lead generation from a variety of international and domestic basins. Expertise in acquisition evaluation, attribute analysis, AVO modeling, field studies, and paleo data. Solid technical 2D & 3D seismic interpretation skills on GeoQuest, Landmark, Oracle, Petcom and SMT. Good oral and written communication skills. Geographic experience in Alaska, Brazil (bid round), China, Egypt, Gulf Coast, Gulf of Mexico, Mexico, offshore, Peru, Texas, Trinidad, and west Africa.

Geophysicist with 40 years diverse domestic and international experience at major and independent companies. Expertise in seismic interpretations, stratigraphy, composite contour mapping using 2D/3D/4D data sets, AVO analysis, digital processing and data acquisitions, quality control. Software experience in 2D/3D, Landmark, Promax, ZMap and Thrust line. Geographical work in Gulf of Mexico (shelf), Gulf Coast ( Alabama, Louisiana, Texas), Rockies, Oklahoma, New Mexico and north, east and south Texas. International experience in South China Sea, North Sea, Algeria, Turkey, and Saudi Arabia. Bilingual: English/Turkish.

Geoscientist with a master’s degree in geology and 25 years of industry experience working for midsize and major oil and gas companies. Experienced in exploration, exploitation, and integration of geophysical and geological data. Additionally experienced in generating prospects, utilizing evaluations, and interpretating subsurface, seismic, and engineering data. Geographic areas worked incude California, Gulf coast, Rocky Mountains, Hungary, and Venezuela. Software proficiency includes Landmark, GeoQuest, and SMT.

Geoscientist with a bachelor’s degree in geology and 30 years of experience working for major operators and service companies in the oil and gas industry. Experienced in integrated interpretation and mapping of 2-D and 3-D seismic, pore pressure prediction, gas migration, and fluid overpressures. Additionally experienced in deepwater seismic imaging, reservoir geology, and prospect generation. Geographic areas worked Utica Shale, Wilcox, Eagle Ford Shale, east Texas, central Louisiana, and offshore west Africa. Software proficiency in Landmark and GeoQuest.

Professional geophysicist with Civil Mining Engineer Degree and 28 years of experience working for government corporations, major oil companies, service companies, and as a consultant. Experienced in quality control of 2-D seismic data for acquisition and processing, regional interpretations, basin analysis, prospect generation, and development prospects. Geographic areas worked include Latin America, Chile, Saudi Arabia, and the U.S. Proficient in Charisma-GeoQuest, Kingdom, SeisWorks, and SeisVision-GeoGraphix.

Geophysicist with two Bachelor's degrees 30 years of exploration and exploitation experience with large international companies. Highly skilled in analysis of 2-D and 3-D seismic data and use of AVO. Expert in interpretation and mapping of sub-salt exploration plays using depth imaging and seismic sequence stratigraphy. Highly experienced in prospect generation, data acquisition, and data processing. High level of experience in supervision and management of geoscientists. Geographic areas worked include Permian Basin, Anadarko, Appalachian, Powder River, Wyoming Overthrust, Black Warrior, Texas Gulf coast, Louisiana, Alabama, and both shelf and deepwater Gulf of Mexico. Computer skills include working knowledge of Landmark, Geoquest, SMT, GeoGraphix, ZMap, and Microsoft Office. Fluent in Spanish.

Geophysicist with a master’s degree in geophysics and over 30 years of experience working for major oil and gas companies, large independents, and service companies. Expert in prospect generation. Additionally experienced in geophysical interpretations, seismic data acquisition and processing, joint venture participation and deal evaluations and negotiations, mentoring, and training. Additional experience in developing and implementing digital seismic databases. Geographic areas worked include the onshore and offshore Gulf of Mexico, south and west Texas, Mississippi, Alabama, and the U.S. mid-continent region. Software expertise in SMT, Landmark, GeoQuest, and Hampson-Russell.

Geophysicist with a master’s degree in geology and 29 years of experience working for national and large independent oil and gas companies. Expert in seismic interpretations for deep water exploration and developmental wells. Additionally experienced in signal analysis, supervision and quality control of 2-D and 3-D seismic acquisition, seismic processing and reprocessing, working with multi-discipline teams in offshore lease sale projects, seismic sequence analysis, and AVO data processing and analysis. Geographic areas worked include the shelf and deepwater Gulf of Mexico, Malaysia, Vietnam, Egypt, Venezuela, Russia, and West Africa. Software proficiency in SMT, OpenWorks, SeisWorks, SpecDecomp, Z-MAP, GeoProbe, SynTool, TDQ, PostStack, PAL, VoxelGeo, Probe, and GeoQuest.

Geoscientist with a master’s degree in geology and geophysics and 22 years of experience working for a major oil and gas company and service companies. Expert in prospect generation and property evaluation. Additionally experienced in 2-D and 3-D seismic interpretation, seismic data integration, sequence stratigraphy and plate tectonic history, general geophysical support, AVO studies, project management, and asset evaluations. Geographic areas worked in the Gulf of Mexico and Latin America. Software proficiency in SeisWorks, Charisma, SMT, and EarthWorks. Language fluency in Spanish, Portuguese, and Italian.

Geoscientist with a master’s degree in Applied Mathematics and 30 years of international and domestic exploration and producing experience with oil companies and contractors. Expert in 2-D and 3-D seismic interpretation. Experience includes working with multidisciplinary teams on field studies, development evaluations, acquisition analysis, and prospect screening. Additional experience includes structural, lithologic, and stratigraphic interpretation, specializing in AVO/inversion lithology studies. Geographic areas worked include east and south Texas, the Gulf coast, the Gulf of Mexico, Alaska, the mid-continent, Indonesia, Asia, north Africa, the North Sea, and some offshore areas of South America. Software proficiency in Statimagic/SeisFacies, PC/UNIX Work Stations-Landmark, GF, Probe, Voxe/Geo, Hampson-Russell, Sage, Odegaard, Geolog, SMT, VisualVoxAt.

Geophysicist with a PhD. and over 30 years of experience working for major and mid-sized E&P companies. Expert in exploration and production geophysics including advanced modeling, interpretation and processing of seismic data, and 3-D design and operations. Experienced in project management, research and development, interactive workstation applications and support, prospect evaluation, and the application of geophysical technology to the solution of exploration problems. Geographic areas worked include the Anadarko and Arkoma Basins, Louisiana and Texas onshore, and the Gulf of Mexico shelf, upper slope, and deepwater. Software proficiency in SMT and Landmark.

Geophysicist with a bachelor of science degree in geology and 37 years of experience working for large international energy companies. Expert in exploration, development, appraisal, seismic interpretation techniques including, amplitude analyses, coherency technology, 3-D visualization, AVO and reservoir modeling. Additionally experienced in basin analysis, field development studies, and asset acquisitions. Geographic areas worked include United Kingdom, Ireland, Cuba, Venezuela, Argentina, Australia, Cameroon, Egypt, Mautitania, Brunei, Indonesia, Malaysia, Pakistan, Thailand, and China. Software proficiency in SeisWorks, Syntool, and StratWorks. Language fluency in Spanish.

Geophysicist with a master's degree in geophysics and more than 20 years of experience working for national and international oil and gas companies and as an independent consultant. Experienced with seismic reprocessing, both pre-stack and post-stack, DMO, migration, depth imaging and modeling, seismic facies evaluation, reservoir characterization, reservoir and fault seal, overpressure assessment, velocity modeling, and depth conversion. Additionally experienced in major seismic sequence stratigraphy and integrated structure, salt tectonics, and sequence stratigraphy projects for shelf, deep shelf, and deep water projects. Geographic areas worked include the Gulf of Mexico, South America, west Africa, southeast Asia, and Europe. Software proficiencies include SMT, GeoQuest IESX, Landmark, Paradigm, and AVO and seismic inversion software.

Exploration geophysicist that is highly motivated, results oriented and has extensive domestic and international experience in the oil and gas service companies. Proven prospects generator (both onshore and offshore), provided technical support, define and developed geophysical and geological interpretation workflow, technical analysis to SMT clients worldwide. Particular strengths in 2D/3D seismic interpretation including seismic attribute analysis, seismic modeling and correlating with geological and petrophysical data using 2D/3D cross-sections including log analysis (simple and advanced). Special expertise using PC-based ‘The Kingdom Suite’ (TKS) line of products including the to-be released LogPAK, Landmark including Geograhix (GES suite) and GeoFrame suite, Seisworks, ZMAP, Petrosys, GeoPlus (PETRA), LESA, reservoir modeling (RC2) and simulation (Sure), data administration, and management on PC and Unix interpretation workstations (installation and set up of both stand alone and network licenses). Good knowledge of OS (Windows XP/2000) administration on PC, and software skills using Oracle, SQL, Microsoft Access 97/2000/2003, and other Microsoft Office suite of products. Proven skills in coaching and mentoring new geoscientists (including SMT resellers). Excellent written, presentation and interpersonal communication skills in a multi-disciplinary environment. Possess International data management and interpretation experience and willing to travel.

Geophysicist with two masters’ degrees, in geology and business administration respectively, and extensive oil and gas experience in both domestic and international arenas. Expertise in heavy oil, seismic interpretation, structural modeling, velocity modeling and depth conversions. Background includes reservoir characterization, recovery optimization, and mentoring junior geophysicists. Technical proficiencies include Petrel, GeoFrame, GeoQuest and IESX. Diverse geographic work history includes Gulf of Mexico-shelf, Gulf Coast, and Mid continent, as well as, Mexico, Oman and Venezuela. Native English with fluency in Spanish. Flexible regarding geographic placement but seeking contract position.

Petrophysical Advisor with a bachelor's degree in geology and over 30 years of extensive petrophysical experience in the oil and gas industry working for major operators. Expert in the integration of petrophysical, geological, and production data for reservoir studies and successful recommendations for completions. Experienced in conventional and unconventional formation analysis, completions, reservoir studies that include porosity, water saturation, net and gross pay, and lithological facies, and mentoring numerous junior petrophysicists and geoscientists. Geographical areas worked include US onshore and offshore basins and international deepwater basins. Language proficiency in English, Spanish, and Arabic.

Petrophysicist with a PhD in Geology and over 30 years experience in petrophysics, mechanics, and geophysical specialties. Experience includes petrophysics, rock mechanics, drilling operations, geophysics, logging operations, interpretation, reserves estimation, reservoir engineering, and production. Teaches several courses that relate borehole properties that depend on earth conservation to drilling and rock mechanics engineers.

Petrophysicist with over 30 years of implementing innovative petrophysical solutions to petroleum E&P, geothermal E&P, minerals E&P, and environmental problems. Has a Ph.D. in Geology and Exploration Geophysics and has proven strengths in creative problem solving, communication, data base management and training. Demonstrated performance in an extremely broad range of activities, covering petrophysics and geophysics. Extensive experience in slim-hole logging, vendor wireline and MWD/LWD operations and product quality. Set up to use J-Log.

Petrophysicist with bachelor’s degree in industrial engineering, and over 30 years of experience working in the oil and gas industry for E&P companies, consulting firms, and service companies. Expert in international and domestic log evaluations, open-hole logging operations, exploration wells, and formation imaging. Additionally experienced in well production evaluation, and the development and implementation of operational training programs. Geographic areas worked include offshore United States, South America, the Middle East, and Russia. Software proficiency in PowerLog, SymbioLog and LOGIC.

Petrophysicist and completion specialist with a Bachelor's Degree and 21 years of international and domestic experience in a wide variety of reservoirs. Recognized as a Distinguished Lecturer for the Society of Petroleum Engineers on the integration of petrophysical inputs with reservoir and completion disciplines. Extensively experienced working with multi-disciplinary teams on integrated reservoir characterization studies both with educational institutions and energy companies. Skilled at working within multi-disciplinary integrated reservoir characterization studies in both low and high permeability reservoirs. Geographic areas worked include offshore and onshore Louisiana and Texas, the mid-continent, the Rocky Mountains, Venezuela, Canada, Trinidad, China, Argentina, and Austria. Proficient in PowerLog, QLA2, Prism, PetroWorks, MFrac, and FracproPT. Effective communication skills in Spanish.

Petrophysicist with a Doctorate's Degree and 26 years of domestic and international experience in research and operations environments. Skilled in clastic and carbonate reservoirs, heavy and light oil, gas, and utilizing conventional wireline and LWD data. Experienced in single-well analyses of historical and newly drilled wells, multi-well equity determination and arbitration, and re-processing. Proficient in incorporating rock (cuttings and core) data and geological considerations. A designated co-inventor on both American and European patents, and trainer of geologists and engineers during international assignments.

Petrophysicist with 35+ years in the oil & gas industry, including 4+ years in management and 25+ years of intensive petrophysical computer analysis and support. Responsibilities have included data acquisition, quality control and computer analysis for drilling, production and exploration wells as well as reanalysis of older wells, conventional and specialized core analysis, completion and testing for workovers, cased- hole logging and cased-hole analysis including PLT, TDT and cement-bond logs. Skill sets include: field studies, tight gas, sands, reservoir stimulations, economic evaluations and administration and support of data systems and applications. Specialized expertise in the UNIX , GeoLog, ECLIPSE, Powerlog, IP and StrataModel. Domestic work history includes: Alaska, California, Wyoming, North Dakota and onshore/offshore Gulf Coast. International work encompassing the following: Algeria, Argentina, Australia, Canada, Bahrain, China, Egypt, Gabon, Indonesia, Ireland, Korea, Mexico, North Sea, Russia, Senegal, South Africa, Sudan, Tunisia, Turkey and Venezuela. Energetic candidate who is interested in international or domestic US placement.

Geoscience Technician holding a BS in Geology and 25 years of experience in interpretation and regional studies. Worked with ArcView, AVO, GeoFrame, GeoGraphix, GeoQuest, Hampson-Russell, Landmark, Oracle and ArcGIS on well data, log data, seismic, moving information from data base to data base and from spreadsheets. Enjoys being a geotech and applications support. References refer to having a high work ethic, excellent attitude, and is very focused.

Sr. Geotech with 20+ years working in the petroleum industry and expertise in mapping, web design, data implementation and staff management. Consequential accomplishments include a 15% overall reduction in development time, 50-60% reduction in costs as a result of digital conversion, and, as first line support, a 10% reduction in down time. Trained and mentored new technologists resulting in reduced training costs of $1500-$200 per tech and reduced time to become fully productive. Coordinated computer support and exploration teams which resulted in a $150,000 reduction in expenditures. The candidate possesses strong cartography skills. Among his project management achievements, on behalf of his employer, was the revision and publication of the Geological Map of Trinidad. This map, bearing his name, still hangs in the offices of the Trinidad Ministry. Goodwill relations between the company and the Ministry were a result of these efforts. Web based applications include: LiveLink and Oracle Portal. Experienced in Z-MAP, Landmark, Microstation, ArcGIS, A2D,AutoCAD, Microsoft suite, (graphics) and SDI_Montage. Geographic projects in the following areas: Gulf of Mexico, Egypt, Norway and Trinidad. Seeking Houston based placement.

Accounting and Administrative Professional with a bachelor’s degree in accounting and over 20 years experience in the energy and property management industries. Expertise in project accounting, payroll, budget preparation and monitoring, job cost review, purchasing for departmental and job related items, cash projections, cash management and inter-company accounting. Excellent work ethic and team player.

Accountant with a bachelor’s degree and 20 years of experience working as a controller for various companies in Louisiana. Experienced in all phases of accounting functions including inventory management, cost accounting, fixed asset management, setting up and maintaining accounting controls, financial statement and sub-ledger accuracy reviews, review and preparation of monthly journal entries and accruals, preparation and consolidation of annual budgets, oversee and assist in various types of tax preparation, and preparation and management of annual audits.

Accounting Manager with a master’s in accounting and over thirty years of experience working for Fortune 500 companies and smaller companies that are leaders in their field. Extensive experience working directly with top corporate financial officers in boundary-spanning assignments in project management and administration and project controls. Industries served include construction, engineering, communications, computer services, oil and gas, international inspection, insurance, financial services, distribution, automotive, and Big Four.

Financial Accounting and Operational Manager with a bachelor’s degree and more than 25 years of progressive experience, offering significant expertise in project management, service management, manufacturing accounting management assignments, and focused on operations and general/financial accounting and operations for diverse business units of a Fortune 100 company. Background in management of budgets, expense/revenue forecasting, P & L and balance sheets, LIFO calculation management, month-end closing and other accounting operations. Working knowledge of MS Office, applications of e-mail, the Internet and overview understanding of SAP.

Diversified professional accountant with a bachelor's degree and 11 years of oil and natural gas experience. Solid experience in financial/general ledger, gas marketing and revenue accounting for both onshore and offshore operations. Proficient with gas imbalance statements, production accounting, finance and joint interest accounting. Experience working with allocation and recording of oil, natural gas and natural gas liquids sales volumes for Offshore, Texas, Louisiana, Oklahoma, Kansas, New Mexico, and Wyoming properties. Strengths include AP/AR, Sarbanes Oxley, cash positioning, royalty posts and MMS. Computer literate with working knowledge of Oracle, Excalibur, Premas and Artesia Gas Management Systems; SAP, Dwights, Word, Access, and Excel. Bilingual in Spanish.

Auditor with a bachelor’s degree and 25 years experience in oil and gas consulting accounting experience. Extensive work with numerous clients both major oil companies and small Fortune 500 companies. Expertise in production and drilling accounting, audit managing, control analyzing, training and development, industrial management, business management, and internal auditing. Additional skills include joint interest and contract compliance reviews, fraud, litigation support.

Business and Finance Executive with a master’s degree and over 25 years of experience in international O&G, including E&P, Refining, Supply & Trading, Branded / Unbranded markets, Oil Products Retail, Pricing management, Regional Branded / Unbranded Sales (wholesale and retail pricing / cost analysis), Supply and trading, gasoline blends including ethanol. Additional experience in investment banking technical support, project finance, refining & LNG projects, financial advisor, world scale hydrocarbon project claims & litigation support, and directing teams: technical translation. Computer skills include Linear Programming System (PIMS), Financial Statements (Pro-forma), Office XP (Excel & Financial Applications in Excel, Word, PowerPoint, Outlook, Access, FrontPage and Project), Windows, and Mac OS. Fluent in Spanish, French, and basic Portuguese.

Revenue Accountant with a bachelor’s degree in accounting and extensive experience in revenue accounting, financial reporting, systems analyst, database management and plant accounting in the oil and gas industry. Additional experience recording oil and gas sales, coordinating pipelines and markets, preparing offshore gas balancing statements, reconciling crude oil sales, and training new employees. Computer skills include Lotus, Excel, People Soft, and QuatroPro 6.01.

Accountant with CPA and CIA designations together with BS degree and MBA (ie, concentration in Finance) and more than twenty years experience working for large and medium size E&P companies as well as drilling companies. Variance analysis, month-end closing, joint interest billing, project accounting and gas accounting. Software proficiencies include SAP FI/CO and Excel.

Economist with a PhD and over 25 years of experience and a diverse background in computer systems, treasurer finance/banking and labor relations. Strong skills in economic modeling and presentations. Additional experience in providing economic input to oil industry tax experts, coordinating development of business continuity plans, and creating fiscal and energy policy analysis. Reputation for professional competence.

Landman with has over sixteen years experience working for oil & gas companies and as an independent. Expert in acquisition and negotiations, title software, mapping, and graphics. Experienced in acquiring rights of way, mineral (oil, gas and geothermal) lease acquisition, permitting, right of way engineering research, title research and curative, and various other aspects of professional land related work. Geographical areas worked include California, Arizona, Nevada, Montana, Colorado, Nebraska, Kansas and Indiana.

Landman with a bachelor’s of business administration and over 30 years of experience in acquisitions, business development, contract negotiation, contract preparation and divestitures. Additionally experienced in land administration, management, supervision, MMS/ RRC and project management. Geographic experience includes both deepwater and shelf Gulf of Mexico, the Louisiana and Texas Gulf coast area, Mid-continent, the Permian Basin and the Rocky Mountains.

Petroleum Landman with 14 years experience. Skilled in contracts, including preparation, negotiation, permitting, brokerage and due diligence review. Has handled all phases of exploration and developmental land work from initial, cursory title research to complex, drill-site title curative. Adept at prospect management from inception to completion. Experience working in the Rocky Mountain producing states as well as Oklahoma, Texas, Arkansas and Louisiana. Strong computer, research and organization skills; proficient in Tobin.

Landman with two master’s degrees and 39 years of experience, most recently with a major energy company. Experienced in domestic and international negotiations. Geographic areas worked include the Rocky Mountains, the Austin Chalk play of Central Louisiana, Oklahoma, California, Kansas, and Indiana, Southeast Asia, South America, the North Sea, and Canada.

Land, Legal, and Regulatory Specialist with a Bachelor’s degree, a Juris Doctorate degree and 32 years of industry experience working for major oil and gas company and law firms. Expert in Louisiana permitting and regulatory at the Office of Conservation, Office of Mineral Resources, Office of Coastal Management, DEQ, Secretary of State, Department of Revenue (severance tax), various parish offices (ad valorem tax), US Army Corps of Engineers, and Federal Aviation Administration. Experience includes over 530 acquisition due diligence projects located in more than 70 parishes or counties.

Directional Driller with over 30 years experience in the drilling industry. Extensive experience being in charge of all offshore and out of state operations in the US and being responsible for the safe operation of the entire rig and personnel. Excellent working knowledge of math concepts. Computer skills include Windows: VIPR 2.05 (Visually integrated petroleum reports and design), Excel, Word, Power Point, Outlook, MP3 Accounting and Maintenance Software, Rim Base Reporting, and Operation Reporting programs used in house.

Driller with 40 years of experience in the oil and gas industry. Experience includes operations including high pressure/high temperature, horizontal, and high angle drilling; fishing and special operations including underbalanced drilling; completions, and workovers. Geographic areas worked include onshore and offshore drilling all over the United States including Texas, Kansas, Alaska, New Mexico, Oklahoma, Louisiana, Montana, Wyoming, Utah, and the Gulf of Mexico. International experience includes the Middle East and Europe.

Drilling Engineer with a bachelor’s degree in mechanical engineering and more than 40 years of experience working for major operators and as an independent consultant. Experienced in high angle directional drilling and completion to include detection of geopressure formations, implementation of well control procedures, floating rig drilling programs, high pressure, and deep well drilling and testing. Geographic areas worked include the Gulf coast, Gulf of Mexico, central and western U. S. locations, the North Sea, offshore and east coast of Canada, South America, and Africa. Language proficiency in English.

Drilling Superintendent with more than 35 years of experience working for a major operator and consulting firms. Experienced in wellsite supervision of underbalanced, vertical, directional, and horizontal drilling as well as regulations compliance. Geographic areas worked include the Gulf of Mexico, the Gulf coast, the Rockies, various Mid-continent basins, and the Barnett shale. Software proficiency in DIMS, WellView, and WellEz. Certifications include supervisory level in both IWCF and IADC.

Production Engineer with a bachelor’s degree and 42 years of experience working for international operators. Experienced in coil tubing design and supervision, electric pumps, field operations, wireline operations, water injection, and well testing. Geographic areas worked include Abu Dhabi and Lybia. Language proficiency in Arabic and English.

Drilling and Completions Superintendent with 35 years of expereince working for small and major operators. Expereinced in drilling and completions operations including multi-stage fracturing, coiled tubing, wireline, well intervention, well testing, workovers, and horizontal drilling. Additionally experienced in HSE oversight, permit renewals, inspections, and crew training. Geographic areas worked include Texas, Louisiana, Michigan, Colorado, Wyoming, Pennsylvania, and Colorado. Software proficiency in OpenWells, WellView, and DIMS.

Drilling and Workover Supervisor with 32 years experience with major international oil companies in positions of increasing responsibility. Has represented large oil companies as a Drilling Representative and Drilling Supervisor. Additional skills include supervision of drilling and testing of exploration wells, carrying out workovers and converting older wells, and supervising the upgrading of rigs. Familiar with various oil company computer systems. Fluent in Spanish.

Drilling Professional with bachelor’s degree and 35 years experience in the drilling industry. Extensive experience designing and engineering deepwater wells, Deepwater Drilling Engineer, HTHP wells, Floaters, Jack-ups and latest built DP drill ships. Participated in numerous international drilling projects for major oil companies. Computer skills include DIMS, StressCheck, Well Plan, MS Excel, MS Word, MS Powerpoint, MS Project, Lotus Organizer, and Lotus Notes.

Petroleum engineer with five years of experience in well planning and design built on a strong foundation of hands-on experience as a rig site supervisor managing drilling operations. Demonstrated ability to analyze issues on a practical and strategic basis, plan appropriate actions, and implement successful solutions.

Drilling and Completions Engineer with a bachelor's degree in petroleum engineering and 28 years of oil and gas industry experience working for small- to mid-sized oil and gas companies. Experienced in well planning, creating drilling procedures, field development, well optimization, log interpretation, formation evaluation, stimulation techniques, fractured completions, gravel pack completions, cost estimating, hydraulic fracture design, workover design, well construction, HSE compliance, and BHA design. Geographic areas worked include Texas, Louisiana, the Gulf coast, the Gulf of Mexico, and West Africa. Software proficiency in DIMS, Stress Check, PIE, MBAL, GAP, PROSPER, and GeoGraphix for well log interpretation. IWCF and IADC certified.

Drilling and Completions Consultant with a master's degree in civil engineering and 38 years of experience working large independent and major operators. Expert in applying technology and services to improve performance and reduce the costs of well construction. Additionally experienced in production, completion, workover, and drilling field operations; preparing AFEs, estimating costs, infield drilling review, underbalanced drilling, vendor selection, and wellsite supervision. Geographic areas worked include the Gulf of Mexico, Texas, Mississippi, Alabama, and Louisiana. Registered Professional Engineer in the State of Louisiana.

Drilling Engineer with a bachelor’s degree in mechanical engineering and 41 years of experience working for independents and major oil and gas operators. Experienced in designing, implementing, and overseeing drilling, testing, and completion operations in domestic and international locations including onshore, offshore, and deepwater. Geographic areas worked include the Gulf of Mexico, Indonesia, Thailand, and Egypt. Software proficiency in Microsoft products, DIMS, Solid Works, and AutoCAD. Language fluency in English with a basic command of Indonesian.

Drilling Engineer with a bachelor’s degree in mechanical engineering and more than 30 years of experience working for a major operator and as an independent consultant. Experienced in drill well planning, estimating, logistics, contracting, rig team training, execution, and completion. Additionally experienced in facilitating or instructing various technical drilling operations courses. Software proficiency in Landmark Well Plan. Language fluency in English. Licensed Professional Engineer in Texas.

Drilling Engineering Manager with a bachelor's degree in petroleum engineering and 33 years of experience working for drilling companies and operators. Experienced in planning and executing offshore projects, leading drilling managers, engineers, and logistics and operations personnel; establishing operational bases, and overseeing and managing drilling budgets in excess of a half billion dollars. Geographic areas worked include the Gulf of Mexico deepwater, Africa, South America, the Middle East, the North Sea, Montana, California, Texas, Louisiana, and Alabama. Registered Professional Engineer in the State of Louisiana.

Drilling Manager with a bachelor's degree in petroleum engineering and 36 years of experience working for a major operator and as a consultant. Experienced in leading multi-disciplined teams, devising strategies, determining priorities, planning, budgeting, and cost oversight. Additionally experienced in drilling, testing, and completion of exploration wells; supervising contractors, and overseeing drilling and completion operations. Geographic areas worked include the Gulf of Mexico shelf, the onshore Gulf coast, west Texas, Colorado, New Mexico, Nebraska, Utah, Wyoming, and Kurdistan.

Drilling Engineer with a bachelor's degree in mechanical engineering and 28 years of oil and gas industry experience working for majors and mid-sized to large independents. Experienced in managing production operations, project planning and development, manpower resourcing, employee supervision, managing drilling and completion operations, budgeting, production forecasting, cost controls, safety and environmental compliance, acquisition and divestiture design, regulatory permitting, contract negotiations, benchmarking, subsea development, and SPAR project execution. Geographic areas worked include the Gulf of Mexico shelf and deepwater, east Texas, north Louisiana, Arkansas, Wyoming, Alaska, Australia, and Venezuela. Software proficiency in Peep, Compass, WellPlan, WellCat, StressCheck, GAP, PROSPER, and MBAL. Language fluency in Spanish and English. Licensed Professional Engineer in the State of Texas.

Registered petroleum engineer with a master's degree and more than 30 years of experience with producing companies and as a consultant. Experienced in office and well-site supervision for drilling, completion, production, and workover operations for offshore, inland, and land geopressured wells along the Louisiana and Texas Gulf coasts. Highly experienced in hydraulic fracturing. Expert witness experience for regulatory hearings as well. Home base is Houston.

Production Engineer with a bachelor's degree and 28 years of experience in the oil and gas industry working for major E&P companies, large independents, and as a consultant. Experienced in completions, workovers, stimulation, sand control, coiled tubing operations, wireline, TCPs, artificial lift, production optimization, expandable tubulars, solids-free brine, well design for long-reach horizontal wells, and drilling operations. Geographic areas worked include the Gulf of Mexico, inland water Louisiana, onshore Texas, the North Sea, the Persian Gulf, the Arabian Sea, central and southeast Asia, the South China Sea, Indonesia, Siberia, and Trinidad. Computer skills include a variety of proprietary software.

Drilling and Production Engineer with a bachelor's degree in petroleum engineering and 45 years of experience working for service companies, operators, and as a consultant. Experienced in drilling, completions, production, workovers, field development planning, acquisitions, production optimization, and vendor negotiations. Geographic areas worked include Texas, Oklahoma, Kansas, Colorado, North Dakota, Montana, South Dakota, Colombia, Oman, Russia, the Ukraine, and China.

Drilling Operations Manager with a bachelor's degree in petroleum engineering and 33 years of upstream oil and gas experience working for independent E&P companies and service companies. Experienced in rig installation, horizontal, extended reach, and vertical drilling; underbalanced drilling, completions, workovers, facilities construction, fracturing, artificial lift, well design, writing AFEs, designing drilling and completion programs, casing design, and budgeting. Geographic areas worked include west Texas, south Texas, the Texas Gulf coast, California, Oklahoma, Louisiana, Arkansas, New Mexico, Alaska, China, South America, and the Middle East.

Drilling and Production Engineer with a master's degree in chemical engineering and 44 years of experience working for operators, service companies, and as a consultant. Experienced in drilling, completion, and reservoir engineering; trouble-shooting operations, equipment selection, and supervision of operations on land and offshore. Additionally experienced in the development of subsea equipment and deepwater drilling and production operations. Licensed Professional Engineer in the State of Texas.

Production and Drilling Engineer with a bachelor’s degree in mechanical engineering and more than 30 years of experience working for independent oil and gas companies, and major operators. Experienced in field operations, fracture design, plug and abandonment, production surveillance, workover and recompletion design, remedial operations, and waterflooding. Geographic areas worked include the Gulf of Mexico and east Texas. Software proficiency in Microsoft Excel, Word, and PowerPoint. Language proficiency in English.

Production Engineer with a bachelor's degree in petroleum engineering and 45 years of expereince working for mid-sized to large operators and as a consultant. Experienced in conventional and polymer augmented waterflooding, gas injection, infill drilling, workovers, artificial lift design, completions, and production forecasting. Geographic areas worked include Colorado, Wyoming, North Dakota, Texas, Yemen, India, and Indonesia.

Petroleum engineer with a Master's Degree and over 30 years of domestic and international experience in reservoir, production, project management, and drilling and workover projects. An accomplished reservoir engineer in estimation, evaluation, and performance prediction. Experienced in reserve estimation, field studies, portfolio and project economics, field development, artificial lift design and operations (all types), and production log analysis. Geographic areas worked include south Louisiana, the Gulf of Mexico, the Rocky Mountains, southern California, and southeast Asia. Proficient in various computer programs including Microsoft Office, Lotus 1-2-3, and ARIES. Proficient in French and Indonesian.

Production and Reservoir Engineer with a master's degree in petroleum engineering and 37 years in the oil and gas industry working for large independents, governmental agencies, and a national oil company. Experienced in artificial lift, waterflood design, implementation, and monitoring; enhanced oil recovery, field development, nodal analysis, completions, workovers, reserve analysis, and budgeting. Geographic areas worked include the Permian Basin, Colombia, South America; Algeria, and Holland. Software proficiency in PETRA, OFM, DIMS, WellView, PERFORM, RODSTAR, and RODDIAG.

Engineer with a bachelors degree in petroleum engineering and more than 30 years of experience in operations, production, and drilling. Knowledgeable in light oil, deep, high-pressure reservoirs, and heavy oil, shallow, low-pressure reservoirs. Skilled in reservoir, production, and drilling projects. Experienced in reservoir management, completion techniques, stimulation, reserves estimation, field studies, AFEs and project economics, field development, artificial lift design and operation, and production log analysis. Proficient in various computer programs, including Microsoft Office, PA, DSS, PEEP, and FRACPRO.

Production Engineer with a bachelor's degree in petroleum engineering and 28 years of oil and gas experience working for large independents and a service company. Experienced in artificial lift design, risk analysis, tender preparation, personnel supervision, completions, workovers, waterfloods, and casing evaluation. Geographic areas worked Columbia, Peru, and the country of Georgia. Computer skills include GAP, MBAL, PROSPER, and Subpump. Fluent in Spanish.

Project consultant with a bachelor’s degree and extensive experience in the oil and gas industry. Expertise in the reservoir evaluations and acquisitions. Experienced both domestically and internationally with deepwater development. Diverse background includes subsea, subsurface and topside operational management.

Production Engineer with 35 years of experience as an oil and gas generalist. Comprehensive background in all aspects of drilling, completion, workover, reservoir management, petrophysical evaluations, economic evaluations and sales. Highly skilled in all aspects of production engineering. Knowledgeable in safety and safety training. Geographic areas worked include south and east Texas, New Mexico, and Louisiana.

Petroleum engineer with over 20 years of operational, technical, and financial experience. Experienced at onshore and offshore drilling and production operations and reservoir and geological engineering. Demonstrates strong leadership, interpersonal skills, and problem-solving abilities. Skilled at implementation, forecasting, contract negotiations, expense control, P&L responsibility, proposal preparation, and start-up operations. Geographic areas include Texas, Louisiana, the Gulf of Mexico, and the San Juan Basin. Computer skills include MS Office, including creating templates for engineering, operations, and administrative functions.

Production and Reservoir Engineer with a bachelor's degree in petroleum engineering and 58 years of experience working for small to large operators and as a consultant. Experienced in well design, regulatory reporting and permitting, well site supervision, drilling, workovers, reserve determination, field development, and risk management. Geographic areas worked include Texas, Louisiana, Arkansas, Alabama, and Mississippi.

Completions Engineer with a master's degree in petroleum engineering and 31 years of experience working for operators, service companies, consulting firms, and as an independent consultant. Expertise in completion engineering including high rate water pack, gravel pack, recompletions, decompletions, subsea completions, and stacked completions. Additionally experienced in providing completion interface requirements for rig selection, preparing detailed well cleanup, testing, and completion procedures; and preparing functional and technical specifications for completion components. Geographic areas worked include Texas, Louisiana, the Gulf of Mexico deepwater, offshore Brazil, Trinidad, Vietnam and China; Venezuela, and Africa.

Production Engineer with a bachelor's degree in petroleum engineering and over 30 years of experience working for small independents and as a consultant. Experienced in the planning and field supervision of drilling, completion, and workover operations. Additionally experienced in production operations management, prospect evaluation, lease acquisition, drill stem testing, reserve estimating, facility and pipeline construction, regulatory reporting, wellbore intervention programs design, and expert witness testimony. Geographic areas worked include south Texas, the Texas Gulf coast, the Illinois basin, and Bolivia. Licensed Professional Engineer in the State of Texas.

Production Engineer with a master's degree in petroleum engineering and seven years of oil and gas experience working for small to large independents. Experienced in horizontal completions, unconventional plays, workover design, nodal analysis, permitting, vendor relations, AFE preparation, project management, budget analysis, and waterflood and CO2 flood operations. Geographic areas worked include Montana, Mississippi, Louisiana, Alabama, and the Gulf of Mexico. Software proficiency in WEM.

Production Engineer with a bachelor's degree in chemical engineering and more than 40 years of experience working for operators and engineering consulting firms. Experienced in the supervision of personnel and field operations including waterfloods, recompletions, and workovers; the evaluation of producing properties for economic enhancement, the design, installation, and start-up of land and inland water production facilities, and the management of regulatory compliance. Geographic areas worked include Texas, Louisiana, Alabama, Oklahoma, New Mexico, Kansas and the Gulf of Mexico shelf. Software proficiency in ARIES. Licensed Professional Engineer in the State of Texas.

Petroleum Engineer with a master's degree over 30 years of broad experience, domestic and international, with major oil companies and independents. Highly experienced in workover and recompletion analysis and implementation, artificial lift evaluation, and nodal analysis. Very proficient in well log interpretation, reserve analysis for field development, acquisitions, and lease sales. Geographic areas worked include the Gulf coast, Permian basin, mid-continent, California, the Gulf of Mexico, Russia, and Mexico. Computer skills include MS Office, PI/Dwights and ARIES.

Production and Reservoir Engineer with a bachelor’s degree in petroleum and natural gas engineering and over 35 years of experience working for a major oil company and independents. Experienced in preparing workover and re-completion procedures, regulatory issues, acquisition package evaluation, and drilling, completion, workover, production, and construction operations. Geographic areas include the Gulf of Mexico, Louisiana, Virginia, Utah, Kentucky, and Tennessee.

Reservoir Engineer with a bachelor's degree and over 20 years of experience. Strong track record with integrated project teams and reservoir development. Closely involved with a number of key initiatives in Operated Development Projects internationally, including progressed Enterprise Oils first GOM Deepwater Operatorship to agreed concept selection. Played key role in first EO FPSO development, drilled 6 complex ”designer” wells. Delivered first operated HPHT, pipe in pipe subsea development. Successfully completed first operated horizontal and extended reach wells, 4-D seismic survey. Introduced 3-D geo-cellular modeling and geostatistics for reservoir description within EO. Geographic areas worked include the North Sea.

Petroleum Engineer with a bachelor’s degree in Chemical Engineering and more than 30 years of experience working for major companies in the oil and gas industry. Technical competencies in completions, interventions, stimulations, production, reservoir and optimization. Expertise includes HPHT stimulations, sand control, design of fracture and matrix treatments, water flooding, artificial lift, scale inhibition, DST’s, well testing, water flooding, as well as well rate enhancement, problem well analysis, de-bottlenecking, and conformance. Geographic work experience includes the United States, Canada and England along with numerous locations in the Middle East and Far East. Registered professional engineer.

Petroleum Engineer with a bachelor's degree in petroleum engineering and more than 40 years of experience in the oil and gas industry. Expertise includes reserve evaluations, drilling cost consulting, expert witness testimony, budgeting analysis, acquisition evaluations, and identifying infill drilling opportunities. Geographic areas worked include the Permian Basin, Texas, Louisiana, New Mexico, Arizona, Colorado, Utah, and Alaska.

Registered petroleum engineer with a Bachelor's Degree and 37 years of experience evaluating oil and gas properties, both company-owned and for acquisition and divestiture purposes. Estimated reserves, evaluated prospects, evaluated reservoirs for exploitation, and presented results to management, lending institutions, and federal regulatory agencies. Extensive experience working with oil and gas operators in log analysis, marketing, and contract negotiations. Geographic areas worked include offshore and onshore Texas and Louisiana, New Mexico, Oklahoma, the Rockies, and Nigeria. Computer skills include Microsoft Office, Paradox, OGRE, ARIES, PEEP, P.I., Dwight's, and PowerTools.

Petroleum and reservoir engineer with a Master's Degree and over 30 years of experience in the oil and gas industry working for major U.S. and foreign companies. High level of expertise in reservoir management and simulation, well testing, reservoir planning, production and unitization, negotiations, and software development as well as enhancement, maintenance, and training of engineers. Geographic areas worked include Venezuela, Libya, and Saudi Arabia. Computer skills include Microsoft Office, Production Analyst, P.I., Excel, and Lotus 1-2-3. Familiar with ARIES, OGRE, and PEEP. Knowledgeable in Spanish and Arabic language.

Reservoir engineer with a Doctorate and over 20 years of experience with a major oil company, service companies, as a university professor, and as a consultant. Highly proficient in conducting reservoir studies, reservoir simulations, and well-test analyses. Also skilled in the interpretation of RFT data and open- and cased-hole well logs. Experienced in water- flooding review, reserve evaluation, coordination of field development plans, and production optimization. Geographic areas worked include Gulf coast, west Africa, Algeria, and the North Sea. Excellent teaching, research, and report writing skills. Computer skills include Excel, PowerPoint, Word, Freelance Graphics, and WordPerfect. Also experienced in the use of PC and UNIX-based simulation, material balance, and well test analysis packages.

Reservoir Engineer with a master's degree in petroleum engineering and 37 years of experience working for major operators and a large service company. Experienced in reservoir development, exploitation projects, economic analysis, reserves determination, exploration activities, and producing integrated development studies. Additionally experienced in mentoring in training and technology transfer. Geographic areas worked include west Texas, the Gulf of Mexico shelf and deepwater, Venezuela, Peru, Ecuador, Argentina, offshore Brazil, offshore Malaysia, the North Sea, the South China Sea, Libya, China, the Niger Delta, North Africa, the Persian Gulf, and Western Siberia. Software proficiency in ARIES, Peep, ECLIPSE, and @Risk.

Reservoir engineer with a Doctorate's Degree and over 40 years of experience in the development and operation of heavy oil primary and thermal leases. Skilled in the use of wellbore heat loss principles and mathematical models for performance forecasting and production analysis for this operation. Knowledgeable in steam generation, steam distribution, artificial lift, production metering, oil treating, and basic economics. Geographic areas worked include California and Canada. Computer skills include Scientific Software’s THERM C, Computer Modeling Group’s STARS, MS Office, and Power Point. Platforms used include PC, IBM R/S 6000, Sun Sparc II (upgrade), and Silicon Graphics R10000.

Reservoir Engineer with a master's degree in natural gas engineering and 45 years of experience working for small to large independent E&P companies and as a consultant. Experienced in acquisitions, divestments, production forecasting, reserve evaluations, and economics. Geographic areas worked include the Gulf of Mexico, Texas, California, and the Rocky Mountains. Computer skills include ARIES, PEEP, and PHDWin. Registered Engineer in the state of Texas.

Reservoir Engineer with a master's degree in management, a bachelor's degree in petroleum engineering, and 30 years of experience working for major operators, service companies, and as a consultant. Experienced in reservoir simulation, nodal analysis, economic analysis, field development, reservoir surveillance, depletion planning, reserve estimating, and decline curve analysis. Geographic areas worked include Texas, the Gulf of Mexico coast, the North Sea, West Africa, South America, and offshore Trinidad. Software proficiency in PHDWin, ARIES, ECLIPSE, PIE, Saphir, PROSPER, PVTP, and Crystal Ball. Language fluency in Spanish.

Engineer with a bachelor’s degree in petroleum engineering and broad experience as a reservoir engineer onshore Middle East and Canada and offshore Trinidad, Europe and Caspian Sea. Practical experience in all aspects of oil and gas petroleum engineering including drilling, operations, stimulation, completions, water injection, gas processing, reservoir management and simulation, drillstem test design, execution and analyses, project planning, costing and economics for field developments, liaison with co-venturers and government departments. Acreage-field evaluation for acquisitions, divestments and license round applications. Seeking long term contract position in the UK working three days per week.

Reservoir Engineer with a PhD in Petroleum Engineering and 30 years experience in the oil and gas industry. Background includes conducting reservoir surveillance, reservoir forecasting, simulation studies, field development, and advanced reservoir engineering. Technical expertise in reservoir simulation, estimation, well production evaluation, field development plan, phase behavior of retrograde condensate gas, improved recovery, risk analysis, prospect evaluation, and economic evaluation. Geographic project vita includes US, onshore and offshore, as well as Africa, Europe, Middle East and Indonesia. Computer competencies include Eclipse, VIP, CMG IMEX, GEM, MoReS, PEEP, OFM, DCA, Decision Programming Language, Shapire, SAS, and Minitab. Registered professional engineer in Texas.

Petroleum engineer with a Master's Degree and nine years of experience in oil research and operations with oil fields in Venezuela. Skilled in the design, handling, installation, and operation of electric submersible pumps (ESP). Proficient in the evaluation and optimization of subsurface sucker-rod pumps and wells, production testing, and well log analysis. Computer skills include Fortran, Mathcad, Visual Basic, and various word processing, spreadsheet, and graphics manipulation packages. Proficient in Eclipse, STARS (CMG), Fraca (IFP), Saphir, UNIX, IRIX, LINUX, Windows, DOS, and Macintosh.

Reservoir Engineer with a master's degree in petroleum engineering and 39 years of experience working for major and independent E&P companies and as a consultant. Experienced in reservoir simulation, reserve estimating, reservoir performance studies, material balance analysis, field development, acquisition analysis, reserve booking for SEC compliance, and personnel management. Geographic areas worked include Louisiana, Texas, and the Gulf of Mexico. Registered Professional Engineer in Louisiana.

Reservoir Engineer with a bachelor’s of science degree in petroleum engineering and over 30 years of experience working for operators and as a consultant. Experienced in consulting and working as part of a multidisciplinary team doing field studies, reserve reports, and evaluation of both, operated and joint-venture, assets for acquisition and divestment. Geographic areas worked include Gulf of Mexico, Oklahoma, Texas and Louisiana. Language fluency in French and English.

Reservoir Engineer with a bachelor's degree in electrical engineering and more than 30 years of oil and gas experience. Experienced in oil and gas acquisitions, corporate lending, cash flow analysis, reserve evaluations, economic evaluations, and project risk analysis. Geographic areas worked include New Mexico, west Texas, Louisiana, the Gulf of Mexico, and Mexico. Computer skills include ARIES, Peep, OFM, and MS Office.

Reservoir Engineer with a bachelor’s degree in mechanical engineering and 35 years of experience working for mid-sized to major oil companies and as a consultant. Experienced in compositional reservoir simulation, reservoir characterization, log analysis, rock and fluid property evaluation, emerging property evaluation, depositional geology, reservoir mapping, and the design and maintenance of secondary recovery projects and EOR projects. Additionally experienced in the development of training classes. Geographic areas worked include the Gulf of Mexico deepwater, Texas, Louisiana, Europe, Latin America, and the Far East. Software proficiency in RMS and Landmark's VIP/Falcon simulator. Licensed Professional Engineer in the State of Texas.

Petroleum Executive with a bachelor’s degree in petroleum engineering and 24 years multi-faceted domestic and international experience in the oil and gas industry. Corporate leader responsible for management of 2.0 trillion cubic feet equivalent reserve base, field development, economic modeling, production optimization, and acquisitions evaluation and implementation. Integrated critical aspects of geology, geophysics, reservoir characterization, production design, operations, legal, land, economics, and strategic objectives to evaluate and present project opportunities to upper management. Responsible for corporate reserve determination, evaluation process, and annual SEC reporting. Coordinated internal reserve determination and audit process and reviews with divisions. Scheduled and interfaced with multiple reserve auditors assuring proper reserve bookings, SEC compliance, and appropriate Sarbanes-Oxley internal controls. Areas of operational experience include the Gulf of Mexico, Canada, West Texas, South Texas, East Texas, South Louisiana, the Gulf of Thailand, and Hungary.

Petroleum Property Analyst with a bachelor’s degree in petroleum engineering and extensive experience in domestic and international reservoir evaluation. Expertise in areas of economic and reserve evaluations for exploration, investment, production, and acquisition or divestiture decisions oil and gas companies, banks and investment consortiums. Economic software includes Aries and PHDWin. Geographic focus includes: majority of U. S. (Gulf Coast, Permian Basin, Mid-Continent, West Coast, and Appalachia), Russia, South America, Middle East, Far East, and Africa. Registered professional engineer.

Engineer and manager with a bachelor’s degree from M.I.T. and an MBA. Experienced in civil engineering, operations engineering, and reservoir engineering. Expert in independent reserve appraisals and field studies as well as in teaching Petroleum Investment Decisions for nearly 20 years, including authoring the requisite manuals. President and CEO of several independent companies performing acquisitions and divestments. Expert in reserves engineering and documentation for public and private companies. Very experienced in preparing data rooms for divestment purposes and evaluating them for acquisition purposes. Geographic areas worked include the entire Gulf coast and Gulf of Mexico in addition to the adjacent areas in Texas and Mississippi. Software expertise includes PhDWin as well as proprietary nodal analysis and reservoir software.

Petroleum engineer with a Master’s degree and over 15 years experience in the petroleum and engineering related industries. Expertise includes reservoir simulation, project management, reservoir management, flow assurance, production engineering, and technology consulting. Experience includes consulting for facilities design, flow assurance, production modeling, reservoir management, simulation, production and development drilling for offshore and onshore fields. Additional experience in developing and presenting a major field study, launching a successful 100 well development drilling program, developing and coordinating project proposals, including exploration, development drilling, platform installation, and waterflood operation. Computer skills include Pipeflow-2, OLGA, Pipesim, Pipephase, WEM, PIPESOFT, and DREM.

Petroleum Engineer with a bachelor’s degree in petroleum engineering, a master’s degree in business administration and extensive experience in engineering and supervisory capacities in all phases of drilling, work-over, production, reservoir, and field operations. Experience covers offshore (deep water and bay environments), along with land operations both domestically and internationally. Twelve year expertise exclusive to the Deep Water Gulf of Mexico environment. Involved in the design and start-up of numerous deep-water projects, platforms, and sub sea wells. Reservoir engineering responsibilities include developing a detailed geologic, reservoir, and economic analysis for each project. This includes evaluating and recommending deep shelf exploratory wells, development wells, sidetracks, workovers, and stimulation candidates. Background includes calculating reservoir volumes, recovery factors, sweep efficiencies, and any other necessary reservoir parameters to quantify the project. Technical proficiency includes Aries for economic evaluation.

Reservoir Engineer with a master's degree in petroleum engineering and 38 years of oil and gas industry experience working for major and large independent E&P companies. Experienced in reservoir evaluation, simulation, and economic analysis. Also experienced in prospect evaluation, field development planning, artificial lift, acquisitions, divestments, completions, and stimulation. Geographic areas worked include the Black Warrior basin, the San Juan basin, the Appalachian basin, Michigan, Alabama, Virginia, West Virginia, Texas, the mid-continent, the Texas Gulf coast, New Mexico, Poland, Chile, Australia, Azerbaijan, Saudi Arabia, Canada, and China. Software proficiency in Petroleum Experts, SAPPHIR, ArcGIS, CMG, and FluidFlow. Registered Professional Engineer in Texas.

Reservoir Engineer with a master's degree in petroleum engineering and 34 years of experience working for a large independent, consulting firms, and as a consultant. Experienced in reserves analysis, risk analysis, economic analysis, and reservoir characterization. Geographic areas worked include Angola, Brazil, and Canada. Software proficiency in VIP, PanSystem, and OFM.

Reservoir Engineer with a master's degree in petroleum engineering and 42 years of oil and gas experience working for mid-sized independents and as a consultant. Experienced in international and domestic business development. Additionally experienced in reservoir analysis, simulation, reserves analysis, and field studies. Geographic areas worked include Texas, Oklahoma, Kansas, Michigan, the onshore and offshore Gulf coast, Canada, Peru, Ecuador, Venezuela, Indonesia, Bangladesh, Thailand, Australia, and Quatar. Software proficiency in CIG.

Business Development Executive with an MBA and a bachelor's degree in mechanical engineering and 33 years of experience working for independent oil and gas companies and consulting firms. Experienced in the management of integrated study teams, the identification and execution of business development opportunities, and the management of mergers, acquisitions, and divestures. Additionally experienced in reserves determination, production forecasting, well performance analysis, risk analysis, petroleum economics, market valuation, auditing, certification, and the reporting of reserves. Geographic areas worked include North America, the Gulf of Mexico shelf and deepwater, South America, Africa, Australia, Asia, and the North Sea. Software proficiency in OFM, PHDWin, and ARIES.

Reservoir Engineer with a PhD in petroleum engineering and 29 years of experience working for a major operator, in academia, and as a consultant. Expert in modeling and optimizing horizontal gas wells. Also experienced in pressure depletion, waterflooding, enhanced oil recovery, unconventional gas, gas-condensate and volatile-oil reservoirs, reservoir simulation, economic analysis, PVT analysis, and model development. Geographic areas worked include the Permian Basin, Oklahoma, Texas, Russia, the Middle East, and the North Sea. Software proficiency in QUICKSIM. Language fluency in English and Russian.

Reservoir Engineer with a PhD in chemical engineering and 26 years of experience working for a major operator, consulting, conducting oil and gas research, and academic instruction. Experienced in complex well design and performance, enhanced oil recovery, analytical modeling, and computational fluid dynamics. Geographic areas worked include Colorado, West Africa, Russia, and the North Sea. Language proficiency in English.

Reservoir Engineer with a bachelor's degree in geological engineering and 31 years of experience working for a major operator. Experienced in reservoir management, project management, simulation, economic analysis, risk analysis, completions, workovers, reserves analysis, and formation evaluation. Geographic areas worked include the deepwater Gulf of Mexico, Texas, Oklahoma, Kansas, Colorado, Wyoming, New Mexico, Venezuela, and Egypt. Software proficiency in proprietary simulation and economic analysis packages.

Reservoir Engineer with 35 years of experience working for a large operator and a consulting firm. Experienced in property evaluation, reserves analysis, economics, simulation analysis, and well planning. Geographic areas worked include west Texas, south Texas, the Gulf of Mexico, the Rocky Mountains, Yemen, China, and Russia. Software proficiency in MBAL, PROSPER, OFM, and ARIES. Licensed Professional Engineer in the state of Louisiana.

Reservoir Engineer with a bachelor’s degree in petroleum engineering and more than 40 years of experience working for large and independent operators and consulting firms. Expert in reserves estimates, appraisals, field studies, economics evaluations, field development, and acquisitions. Additionally experienced in C-level management and planning and budgeting. Reservoir types worked include shale gas, shallow gas, tight gas, coal bed methane, vertical and horizontal solvent floods, gas-cycling and storage, and heavy oil. Geographic areas worked include the Williston basin, the Rocky Mountains, the San Juan basin, on and offshore Gulf coast, Alaska, Canada, Austria, Australia, India, Indonesia, Libya, Tunisia, and Venezuela. Software proficiency in PHDWin. Licensed Professional Engineer in the State of Texas.

Reservoir Engineer with a bachelor's degree in petroleum engineering and 35 years of experience working for independents. Experienced in reserves evaluation, economic analysis, field development planning, risk analysis, workover evaluation, PVT analysis, volumetric analysis, and drilling and completion planning. Geographic areas worked include Kansas, Oklahoma, Arkansas, Louisiana, Texas, and the Gulf of Mexico shelf. Software proficiency in ARIES and Gemini.

Geoscience and Data Technician with a bachelor’s degree in business administration and over 12 years of experience working for major service and oil and gas companies. Experienced in organizing and improving departmental workflow processes while utilizing a broad range of computer systems and software packages. Additional experience includes reviewing client and partner open hole, cased hole and logging while drilling data for content to construct master database and analyzing DLIS files. Software proficiency include Oracle, Schlumberger Toolbox , LAS Command, IHS, Drilling Office, Archive 2000, UNIX, Linux, Red Hat Enterprise 3 Version 8, SAP R/3, LogMart 1.6.3, Via Vista 2.5, EzTools, and FrontPage 2000.

IT Director / Manager with a bachelor’s degree and 20 years of experience in Infrastructures, Data Centers, Network Operations Centers, Help Desks, Call Centers, Systems and Applications. Strong experience in the profitable development and oversight of program, project and support teams and organizations working in tandem with existing and new technologies. Proven conception, development and use of an anticipatory style of fault and event monitoring leading to a minimization of downtime and an increase of productivity within all types and styles of operational and/or support environments.

Sales manager with a bachelor’s degree in business administration and 35 years of sales experience in upstream sector of the oil and gas industry. Experienced in drilling equipment sales and service; designing and developing downhole tools; staff management, including hiring, revenue planning, and training. Geographic work areas include Texas, China, Russia, South America and Africa.

• Disciplines
• Recruiting
• Positions Available
• Resumes
• Featured Candidates
• Our People
• Tools