Production Engineer with a bachelor's degree and 28 years of experience in the oil and gas industry working for major E&P companies, large independents, and as a consultant. Experienced in completions, workovers, stimulation, sand control, coiled tubing operations, wireline, TCPs, artificial lift, production optimization, expandable tubulars, solids-free brine, well design for long-reach horizontal wells, and drilling operations. Geographic areas worked include the Gulf of Mexico, inland water Louisiana, onshore Texas, the North Sea, the Persian Gulf, the Arabian Sea, central and southeast Asia, the South China Sea, Indonesia, Siberia, and Trinidad. Computer skills include a variety of proprietary software.

Drilling Operations Manager with a bachelor's degree in petroleum engineering and 33 years of upstream oil and gas experience working for independent E&P companies and service companies. Experienced in rig installation, horizontal, extended reach, and vertical drilling; underbalanced drilling, completions, workovers, facilities construction, fracturing, artificial lift, well design, writing AFEs, designing drilling and completion programs, casing design, and budgeting. Geographic areas worked include west Texas, south Texas, the Texas Gulf coast, California, Oklahoma, Louisiana, Arkansas, New Mexico, Alaska, China, South America, and the Middle East.

Registered professional engineer with Bachelor's Degree and 24 years of experience working for major oil companies. Expert in production and drilling operations, especially in the design and implementation of hydraulic fracturing and acidizing. Experienced in fluid transport technology transfer, workover operations, field and wellsite engineering, coiled tubing operations, and formation evaluation. Geographic areas worked include Texas, the Gulf of Mexico, Oklahoma, and England. Computer skills include Microsoft Office, @Risk, Dwight's/P.I., Production Analyst, Lotus 1-2-3, Freelance Graphics, DBase, Crystal Ball, and ARIES.

Drilling Engineer with a bachelor's degree in mechanical engineering and over 30 years of oil and gas industry experience working for majors and mid-sized to large independents. Experienced in managing drilling engineering and operations, project planning and development, manpower resourcing, employee supervision, managing drilling and completion operations, budgeting, production forecasting, cost controls, safety and environmental compliance, acquisition and divestiture design, regulatory permitting, contract negotiations, benchmarking, subsea development, and SPAR project execution. Geographic areas worked include the Gulf of Mexico shelf and deepwater, east Texas, north Louisiana, Arkansas, Wyoming, Alaska, Australia, and Venezuela. Software proficiency in PEEP, Compass, WellPlan, WellCat, StressCheck, GAP, PROSPER, and MBAL. Language fluency in Spanish and English. Licensed Professional Engineer in the State of Texas.

Production Engineer with a bachelor's degree in chemical engineering, a master's degree in project management, and 30 years of experience working for mid-sized to major E&P companies and a research facility. Experienced in monitoring production, designing and installing artificial lift, recommending recompletion, workover, and stimulation operations, supervising multi-stage stimulation operations, and well planning. Additionally experienced in drilling engineering including designing and planning HPHT wells, bidding and awarding rig contracts, and designing and planning well tests. Geographic areas worked include Texas, Louisiana, Arkansas, Mississippi, Alabama, Russia, and Egypt.

Registered petroleum engineer with Bachelor's degree and 32 years of experience with large and small independents and as a consultant. Diverse experience includes drilling, production, workovers, completions, economic analysis, and operations in the southeast United States, Texas, Oklahoma, New Mexico, Canada, Indonesia, and Thailand. A great deal of field experience strengthens ability to design and implement procedures for well work. Proficient in OGRE, Eureka, ARIES, Production Analyst, @Risk, Crystal Ball, and other technical software.

Petroleum engineer with a Bachelor's Degree and 15 years of domestic and international experience in research, completions, production, and drilling engineering. Skilled in hydraulic fracture design, rock mechanics, drilling, portfolio and project economics, and field development. Geographic areas worked include Australia, Canada, east and west Texas, the Four Corners area, California, and Alaska. Proficient in Microsoft Office, FRACPRO, StimPlan, Visual Basic, Access, SQL Server XML, Fortran, HTML, and ASP.

Drilling and Production Engineer with a bachelor's degree in mechanical engineering and 31 years of experience working for mid-sized and large operators and service companies. Experienced in well intervention including snubbing, coiled tubing, and wireline operations; completions, drilling and completion design, and AFE estimation. Geographic areas worked include Texas.

Completions and Well Test Engineer with a bachelor's degree in mechanical engineering and eight years of experience with a major service company and an operator. Experienced in well testing and well operations including pressure transient analysis, rate transient analysis, completions, and drill stem testing. Additionally experienced in reservoir characterization and reserves estimation. Geographic areas worked include the Gulf of Mexico, western Australia, Trinidad, Brazil, eastern Canada, Kuwait, Angola, and Russia. Software proficiency in Prosper, GAP, and MBAL. Language fluency in Portuguese.

Drilling and Production Engineer with a master's degree in petroleum engineering and 35 years of experience working for mid-sized to large independents as well as a major oil and gas company. Experienced in drilling, completions, production, facilities, and pipeline operations; budgeting and cost control, workovers, recompletions, facility and pipeline maintenance, and production optimization. Geographic areas worked include the Gulf of Mexico shelf and deepwater, Texas, Mississippi, Alabama, Colorado, Utah, Montana, Wyoming, New Mexico, and North Dakota. Software proficiency in ARIES, PROSPER, and Field Direct.

Registered professional petroleum engineer with Bachelor's degree and 37 years of experience working for major and independent oil companies and as a consultant. Experienced in planning of drilling operations, designing of well programs, selecting equipment, and setting up drilling operations, including wellsite and crew selection and training. Geographic areas worked include South America, India, Australia, Nigeria, the Middle East, and the Gulf coast. Proficient in Microsoft Office and DIMS. Fluent in Spanish. Certified in well control in the U.S. and internationally.

Drilling and Production Engineer with a bachelor's degree in petroleum and mechanical engineering and more than 30 years of oil and gas industry experience working for majors and large independents. Experienced in drilling supervision, subsea equipment selection, on and offshore drilling operations, well testing, surface well pressure measurement, and drilling cost analysis. Geographic areas worked include Spain, Egypt. Angola, Nigeria, Argentina, Russia, Denmark, France, and the Mediterranean. Language proficiency in English French, Italian, Spanish, German, and Greek. Registered Petroleum Engineer in the State of Texas.

Well engineer with a Master's degree and seven years of experience supervising drilling activities such as logging, drilling, mud logging, cementation, sand control, measurement, and logging while drilling. Worked offshore and onshore in the Nigeria Niger delta. Experienced in managing contractors, cost control, and conducting safety meetings. Familiar with proprietary company drilling programs, such as Schlumberger, Halliburton, Baker Hughes, and Elf's Julia reporting systems (equivalent to Shell's drilling information management system, DIMS), and cocktail well engineering programs, as well as reservoir simulation and modeling. Proficient in Excel, PowerPoint, TurboCAD, ACAD, PIE, Mbal, Hysis, Cocktail, Athos, and MS Office. IWCF certification. Fluent in English and French.

Production engineer and attorney experienced in evaluating, preparing and negotiating transactional documents for clients. Experienced in conducting discovery on investment fraud schemes by reviewing reservoir and production studies to identify malfeasance. Also skilled reviewing oil and gas investment proposals by studying the structural maps, production, reserves, isopachs, and cross-sections as well as proposed drilling and production operations in a prospectus for value analysis.

Registered professional engineer with a Bachelor's Degree and 12 years of experience as a drilling supervisor, engineer, superintendent, and manager of offshore Gulf of Mexico drilling and completions activities. Skilled in high-temperature, high-pressure, and sub-sea wells. A published author in reducing remedial cementing, drilling practices, and improving drilling performance. Geographic areas worked include the Gulf of Mexico, Louisiana, Mississippi, east Texas, China, Canada, and the United Kingdom. Proficient in Excel, Word, StressCheck, DIMS, and DrillModel. Familiar with WELLCAT, Tubmove, Crystal Ball, and TDAS.

Operations and reservoir engineer with Bachelor's and Master's degrees and over 17 years of industry experience, both foreign and domestic, with major oil companies and independents. Extremely high experience level in the management of drilling, operations, and reservoir groups for field development and reserve exploitation. Supervisory drilling and operations experience includes a high proficiency in well design, completion, sand control, log interpretation, and workovers. Certified MMS well control instructor. Strong reservoir engineering knowledge with experience in economics, acquisition analysis, and reserve report documentation. Geographic areas include the Gulf of Mexico, U.S. coastal states, Alaska, Indonesia, Malaysia, Norway, Egypt, Thailand, Australia, New Zealand, and China. Computer skills include Microsoft Office, ARIES, OGRE, P.I., Dwight's, and Packwood reservoir simulation program. Fluent in Indonesian and Malaysian.

Registered professional engineer with a Master's degree in Petroleum Engineering and a Bachelor's degree in Geology and 16 years of experience working for major and independent oil companies. Extensive experience in reservoir, production, facilities design, multi-phase flow modeling, and domestic and international project management. Additional strengths in completions, workovers, reserve evaluation, artificial lift, gas lift, log analysis, reservoir mapping, wellsite supervision, acquisitions evaluation, and field development. Geographic areas worked include Argentina, Australia, China, Scotland, Soviet Union, Kansas, Oklahoma, Texas, and Wyoming.

Drilling and Production Manager with a bachelor's degree in petroleum engineering and 35 years of oil and gas experience working for mid-sized to large independents and a major oil and gas company. Experienced in the management and operation of drilling and production departments, facilities design, safety, regulatory and environmental compliance, workover and completion design, and well troubleshooting. Geographic areas worked include Texas, Louisiana, Arkansas, Oklahoma, Mississippi, Kansas, Colorado, and the Gulf of Mexico.

Drilling and Production Engineer with a master's degree in petroleum engineering and 28 years of oil and gas experience working for independents, national oil companies, engineering firms, and as a consultant. Experienced in systems engineering for offshore and deepwater developments, flow assurance, project planning, and project management. Geographic areas worked include the Gulf of Mexico, Nigeria, Venezuela, Spain, West Africa, India, and the North Sea. Software proficiency in PROSPER, WELLPLAN, PipeSim, MultiFlash, StressCheck, and Compass.

Drilling and Production Engineer with a Bachelor's degree in petroleum engineering and 24 years of experience with a large independent. Experienced in production and drilling engineering with special emphasis on optimizing well design for high-angle and vertical, high-rate wells. Recent projects also included review of bid tenders, developing key performance indicators, mentoring younger team members, and procuring equipment and services. Geographic experience includes south and east Texas, central Louisiana, the Gulf of Mexico, Kansas, California, Yemen, and Qatar. Ask for DP259.

Drilling, completion, and workover specialist with over 25 years of diversified experience supervising both, on and offshore units from Semi's, Drill Tenders, Jack ups, and Platform rigs. Work-overs have been with HWOs, CTUs, Drive up units, slick-line, and electric line. Complete hands-on experiences with planning, organization, and implementation of operations. Solid back ground with DTL, HP/HT wells to UBD programs. Working with contingency planning skills, has led to economical and satisfactory completion of programs. Teamwork, training others, and maintaining control of HSE concerns with concise communications, has led to successful operational goals.